Panasonic PT-D10000 Operating Instructions Manual page 31

Connecting the signal to the HD/SD-SDI input module
HD-SDI or SD-SDI HD-SDI or SD-SDI
Note
• Insert the input module that meets the input signal specifications.
• Normally, use SYSTEM SELECTOR in "AUTO".
• If using an input module which supports nine different HD signal specifications (15 formats) (SMPTE292M) or two
different SD signal specifications (SMPTE259M), use the SYSTEM SELECTOR menu to toggle between the
different input signal formats. When this is done, the input signal details will appear on the screen momentarily
and then disappear automatically.
AUTO 1 080i/60i
576i
• If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this happens,
use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being input.
• Use a 5CFB or superior cable for connection to transmit the image information without error.
(Example: 5CFB, 5CFTX, 7CFB etc.)
*1: The LAN terminal of the input module (optional) cannot be used with the PT-D10000U/PT-DW10000U. Use the
LAN terminal that is provided as standard with the projector.
HD/SD-SDI input module (optional) HD/SD-SDI input module (optional)
ET-MD77SD3 (for HD/SD) ET-MD77SD3 (for HD/SD)
HD/SD-SDI HD/SD-SDI
Module Module IN IN
SERIAL SERIAL
ET-MD77SD3 ET-MD77SD3
HD-SDI or SD-SDI HD-SDI or SD-SDI
signal signal signal output signal output
(active through) (active through)
Business digital Business digital
VCR VCR
1 035/60i
480i 720/50p
OUT OUT
LAN LAN
*1 *1
LAN terminal LAN terminal
(10BASE-T/100BASE-TX) (10BASE-T/100BASE-TX)
720/60p 1 080/24p
1 080/24sF 1 080/25p
1 080/50i
1 080/30p
31
ENGLISH –