Status Displays Inside The Viewfinder Screen - Panasonic AJ-D400P Service Manual

Status Displays Inside the Viewfinder Screen

In addition to images, messages indicating the unit's settings and operating status appear on the
viewfinder screen. The centre marker and safety zone marker, etc. are also displayed.
When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of
the setting menu and using related switches appear at the top and bottom of the screen.
Messages informing of the setting contents or of the adjustment course or results can also be
displayed for approximately 3 seconds when settings are changed, during the course of adjust-
ments, or after adjustments have been completed.
¡See "Selecting Display Items" (page 55) for selecting display items, "Display Mode and Setting
Change Message" (page 56) for the setting change message, and "Setting the Marker
Displays" (page 57) for the marker displays.
The display positions of all items which can be displayed are shown in the figure below.
1. Extender display
2. Shutter speed/mode display
3. Remaining tape length display
4. Remaining battery level display
5. Filter display
6. White balance memory display
7. Gain value display
8. Audio level display
9. Iris value display
10. Warning display
11. Safety zone marker
12. Centre marker
13. Super iris ON display
14. TCG (Time Code Generator) display
1 2
EX OFF
o
o
1 W:A
5 6
q 3 r
S F-60
0dB - - - - - - -
7 8
52 (E)
4
14.6V
o
p
n
o
F5.6
9