Basic Operation; Emergency Frequency - Icom IC-A22 Instruction Manual

— 3
BASIC OPERATION
ll Accessing the 121.5 MHz
emergency frequency
The IC-A22 can quickly access the 121.50 MHz emergency
frequency. This function can be activated even when the
keypad lock function is in use. (p. 12)
@ Rotate [VOL] to turn power ON.
@ Push [F] on the keypad.
* ° Ü "appears.
@ Push [O 121.5] to call the emer-
gency frequency.
@ Push [CLR] to exit from the
emergency frequency.
EXAMPLE: Setting the frequency to 120.000 MHz using the keypad.
Wi Setting a frequency
O Using the keypad
@ Rotate [VOL] to turn power ON.
(2) Push [CLR] to select frequency mode when "M" or "WX"
appears in the function display.
@ Push 5 appropriate digit keys to input the frequency.
* Enter [1] as the 1st digit.
+ When a digit is mistakenly input, push [CLR] to clear the
input, then start again.
* Push [ENT] to enter consecutive zero digits.
+ Only (2). [5]. [7] or [0] can be entered as the Sth and final digit.
(&) To change the frequency according to the tuning step
(25 kHz step), push [A] or [V].
+ Push and hold [ À ] or [ Y ] to change the frequency quickly.
Decimal point appears.
с)
4575 | | |
EXAMPLE: Setting frequency to 136.425 MHz using the keypad.
C ED) соо
(Phang == | 19 == |1984
Decimal point appears.
@
—_ | ages