Specifications - Icom IC-A22 Instruction Manual

NEN S SPECIFICATIONS
M GENERAL + Modulation system : Low level modulation
* Frequency coverage i * Spurious emissions** ess than — 60 dB
RECEIVER
a M5d$ " * Receive system : Double-conversion
š ° superheterodyne
Transmit/recelve АМ (6K00ASE) А * Intermediate frequencies : 151 35.8 MHz
Receive FM (16K0G3E)* 2nd 455 kHz
* Antenna impedance :50 Q (nominal) + Sensitivity" :Less than 1.0 uV
° аи : pen = (for 6 dB S/N with 1 kHz, 30% modulation)
йу" :
* Current drain (at 12 V DC): Transmit 1.0 A typical T vios клу š деи. вав
Rated audio 400 mA max. "Less than 25 kHz/ — 60 dB
tme этн + Spurious response :More than 60 dB
" e
+ Usable temperature range: — 10°C to +50 C; m (rm ай : More than 25 dB
+14 F to +122°Е E
* Audio output power" : More than 0.6 W at 1096
* Frequency stability
: £20 ppm (— 10 C to +50°C)
(at12 VDC) i
distortion with an 8Q load.
* Dimensions 157(W) x 153(H) x 35(D) mm e Audio output impedance :8Q
(projections not included) 2 1/4(W) x 6 1/32(H) x 13/8(D) in "
«Weight ые *! Weather channels and FM mode: U.S.A. version only.
(with CM-166 and antenna) + Specifications guaranteed at a transceiver temperature of + 25 °С
(+77 F).
W TRANSMITTER
* Output power :5.0 W (PEP power) All stated specifications are subject to change without
(at 12 V DC, typical) 1.5 W (Carrier power) notice or obligation.
27 Ч