Icom IC-A22 Instruction Manual page 23

ШИ VOR functions
O To select CDI mode
To show the deviation between your flying course and the
desired course, push [F] then [( CDI].
Operating frequency canot be changed.
Each course deviation arrow indicates a
two-degree deviation.
Course indicator is fixed, but it can be
changed with the tuning dial or keypad.
O To select DVOR mode
When entering the NAV band, 108.000-117.975 MHz, the
IC-A22 selects DVOR mode automatically.
To show your aircraft's direction from (or to) the VOR
station, push [F] then [© DVOR].
¡— Operating frequency can be changed.
]— Course deviation needle does not appear.
Course indicator shows your direction
from (or to) the VOR station.
VOR NAVIGATION 6
Ф "TO" or "FROM" flag selection
The to-from flag indicators indicate whether the VOR
navigation information is based on a course leading to the
VOR station or leading away from the VOR station.
To change the flag from "TO" to "FROM" or vice versa,
push [F] then [@ FROM] or (2) TO], respectively.
* When using the "TO" flag and passing through the
VOR station, the "TO" flag changes to the "FROM" flag
automatically.
* When turning power ON, the "FROM" flag is selected
automatically.
МӨ
O Selecting the next VOR station when using
CDI mode (when using the course deviation needle)
Ф Push [F] then [ODVOR].
@ Set the next VOR station's frequency.
@ Push [F] then [S CDI].
* Select "TO" or "FROM" flag, if desired.
ENG