Icom IC-A22 Instruction Manual page 21

lll Weather channel scan
(U.S.A. version only)
(D Push [F] then [ENT-WX] to select a weather channel.
@ Set [SQL] to the point where noise is just muted.
@ Push [F] then [A-UP SCAN] or [W-DN SCAN] to start
the scan.
* When a signal is received, the scan pauses until it disap-
pears. To resume the scan, rotate the tuning dial or push the
[A]or[W]key.
* To change the scanning direction, rotate the tuning dial or
push the [A] or [ V ] key.
@ To stop the scan, push [CLR].
NOTE: A paused frequency or channel is not backed up
automatically. Push [CLR] to stop the scan then wait 2
sec. before turning power OFF, otherwise, the previous
frequency or channel appears when turning power ON
again.
KR CW
SCAN OPERATION 5
Wi Lockout channels
Memory and weather* channels can be specified to be
skipped for the memory and weather* channel scans,
respectively. The lockout channel function is only available
during scan operation.
ENG
socxour Shows the lockout
(@ then Сэ) channel.
Ig 4515720
Memory channel 20 is Memory channel 20 is
scanned during memory skipped during memory
scan. scan.
Ф Push [MR] to select memory mode; or, push [F] then
[ENT-WX] to select a weather channel.*
@ Select the desired channel to be locked out.
© Push [F] then [O LOCK OUT].
+ "LOCK OUT" appears.
+ Lockout channels are skipped during scan.
@ To cancel the lockout setting, repeat above steps.
* Weather channel: U.S.A. version only.