Placing & Anchoring - DCS C-24 Installation Instructions Manual

PLACING & ANCHORING
Lift and place the wok cooktop in the opening. Be careful not to pinch the power cord or gas inlet between
anything. Anchor the wok cooktop; ensure that the appliance is in place and level (See Fig.7).
For cabinets with side access, screw the 2 "L" shaped brackets (supplied) into the holes provided using the #10
sheet-metal screws as shown in Fig.7. Then using the 1/4 - 20 bolt and nuts (supplied), anchor as shown.
For cabinets with no side access, first fasten the brackets to the cabinet side wall using a suitable fastener. Then
drill two 5/32" dia. holes upward into the bottom of wok cooktop and fasten as shown in Fig 7.
Side access anchoring:
Bottom access anchoring:
Wok Cooktop
Wok Cooktop
Countertop
Countertop
777fig09
Fig. 7
8