NetComm N3G001W User Manual page 28

b) 802.1X: In order to use 802.1X security, you need to have a RADIUS server on your network that will
act as the authentication server. Please type in the details for your RADIUS server in the fields required.
c) WPA-PSK/WPA2-PSK : A newer type of security is WPA-PSK-TKIP and WPA-PSK2-ADE. This type
of security gives a more secure network compare to WEP. Use TKIP Encryption Type for WPA-PSK
and AES for WPA2-PSK. After that, please enter the key in the Passphrase field. The key needs to
be more then 8 characters and less then 63 characters and it can be any combination of letters and
numbers. Please note that the configuration for WPA-PSK and WPA2-PSK is identical.
d) WPA/WPA2 : Similar to 802.1X security but with TKIP or AES Encryption. You need to have a RADIUS
server on the network to perform user authentication. Please type in the details for your RADIUS
server in the fields required.
Notes: After configuring wireless security, you also need to configure your wireless adapter to use the same security settings before
you can connect wirelessly. Not all wireless adapter supports WPA-PSK/WPA-PSK/WPA/WPA security, please refer to your wireless
adapter user guide for more details.
It is strongly recommended to set up a simple wireless security such as WEP 6bit or WPA (when the wireless client supports WPA) in
order to secure your network.
Click Save to save the settings and Undo to cancel.
N3G001W 3G Wireless Router User Guide
8
YML869 Rev1
www.netcomm.com.au