NetComm N3G001W User Manual page 25

f. Unnumbered PPPoE + NAPT. For connection with unnumbered PPPoE service with NAPT enabled.
g. MultiSession PPPoE. For ISP with multi session PPPoE.
h. L2TP. For connection with L2TP service.
i. PPTP. For connection with PPTP service.
j. 3G. For connection with 3G service.
Notes: All of the connection types above are used in conjunction with a modem or another router connected to the WAN port except for
3G which needs a 3G PC Card installed.
For 3G service, you need to enter the following information, please refer to your 3G service provider for detail
information.
• APN- Enter the APN for your PC card here.
• Pin Code- Enter the Pin Code for your PC card
• Dial-Number- This field should not be altered except when required by your service provider.
• User Name- Enter your 3G username.
• Password- Enter your 3G password.
• Maximum Idle Time- Enter the number of second you want to have elapsed without any activity before
your Internet connection terminates automatically.
Caution for 3G WAN connection: The 3G connection fields may not be necessary for your connection. The information on this page will
only be used when your service provider requires you to enter a User Name and Password to connect to the 3G network.
Click Save to save the settings or Undo to cancel.
YML869 Rev1
www.netcomm.com.au
N3G001W 3G Wireless Router User Guide N3G001W 3G Wireless Router User Guide