NetComm N3G001W User Manual page 15

Windows vista
1. In the Windows task bar, click on Start and then click Control Panel.
2. Click on Network and Sharing Center.
3. Click on Manage Network Connection on the left menu.
4. Right click on Local Area Connection and click on Properties
5. The Local Area Connection dialog box will display a list of currently installed network items. Ensure that
the check box to the left of the item labeled Internet Protocol Version 4 (TCP/IPv4) is checked. Select
Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
6. In the Internet Protocol Version 4 (TCP/IPv4) properties dialog box, click the radio button labeled
Obtain an IP address automatically. Also click the radio button labeled Obtain DNS server address
automatically.
Click OK twice to confirm your changes and close the Control Panel.
7.
Mac OSX 10.4
1. Click the Apple icon and choose System Preferences.
2. Click on Network icon.
Set Location to Automatic and Show to Built In Ethernet.
3.
4. Click on TCP/IP tab.
5. In the Configure option, choose Use DHCP with automatic address.
6. Click on Apply Now.
YML869 Rev1
www.netcomm.com.au
N3G001W 3G Wireless Router User Guide N3G001W 3G Wireless Router User Guide
1