Led Indicator; Back Panel Port - NetComm N3G001W User Manual

LED Indicators
Label Status
M1
Flashing
Off
LAN
Flashing
On
Off
WAN
Flashing
On
Off
WIFI Flashing
Off
Back Panel Ports
Antenna
To connect to the supplied detachable antenna
WAN 10/100 Base T Ethernet port (RJ-45) uplink port to connect to a modem or router
LAN 10/100 Base T Ethernet port (RJ-45) to connect to Ethernet network card or Ethernet Hub/Switch
Reset
To reset your Wireless Router to factory default settings (All customized settings that you have saved will
be lost!)
Power Connect to the Power Adapter that comes with your package
YML869 Rev1
www.netcomm.com.au
Indicates
Flashes when unit is ready
Power is off
Flashes when data is being sent and received on the LAN connection
Indicates a link to your LAN or Network card is active
Indicates no link to LAN
Flashes when data is being sent and received on the WAN connection
Indicates that the upstream link to your Modem or router via the WAN port is active
Indicates no link to WAN
Indicates that the Wireless link is enable
Indicates that the Wireless link is disabled
N3G001W 3G Wireless Router User Guide N3G001W 3G Wireless Router User Guide