NetComm N3G001W User Manual page 11

Step 4.
1. Connect the power adapter to the port on the back panel of your N3G001W 3G Wireless Router.
2. Then plug the other end of the power adapter into a wall outlet or power strip.
a. The M1 LED will turn ON to indicate that the unit is powered on.
b. Other LEDs will flash ON and OFF as the N3G001W 3G Wireless Router performs initialization and
Internet connection processes. This will take a few minutes.
c. When complete, the following LEDs will illuminate green: M1, LAN, and WiFi.
YML869 Rev1
www.netcomm.com.au
N3G001W 3G Wireless Router User Guide N3G001W 3G Wireless Router User Guide
11