Basic Setting > Wireless - NetComm N3G001W User Manual

3g wireless router

Hide thumbs Also See for N3G001W:

Table of Contents

Basic Setting > Wireless

This page allows you to configure the wireless feature of the unit such as SSID and security.

Wireless - Enable by default. Changing this option to Disable will turn off the wireless feature on the unit

and you will not be able to connect wirelessly.

WMM Capable- Choose Enable or Disable WMM function. WMM stands for Wi-Fi Multimedia that

provides features that improve the user experience for audio, video and voice applications over Wi-Fi

networks.

SSID- Service Set Identifier (SSID) is the name designated for the wireless network of the unit. The default

SSID is default. This SSID can be easily changed to rename the wireless network. (Note: SSID names may

contain up to 32 ASCII characters)

Channel- can be from 1 to 13 and 11 is the default channel. Devices on the network that wants to

connect to the unit must use the same channel. (Note: Most wireless adapter will automatically scan and

match the wireless channel). Changing this option might improve the wireless signal quality. However,

please only use channel 1 to 11 as certain wireless adapter does not work on channel 12 and 13.

Security- You may choose from the following option, No Encryption, WEP.802.1x, WPA-PSK, WPA, WPA2-

PSK, or WPA2. By default the N3G001W uses No Encryption (as shown in the screen above). Other option

that you can use are explained as follow:

WEP (Wired Equivalent Privacy). Enabling this security will protect your data while it is transferred

from the computer to the N3G001W router. Select the WEP Encryption (64bit or 128bit) and enter the

WEP key in Key 1 field. Please note that WEP Encryption key can only use numbers from 0 to 9 and

letters from A to F. 64 bit encryption needs 10 digits key and 128 bit encryption needs 26 digits key.

YML869 Rev1

www.netcomm.com.au

N3G001W 3G Wireless Router User Guide

Table of Contents