Windows 2000 Pcs; Windows Me Pcs - NetComm N3G001W User Manual
3g wireless router
Hide thumbs
Also See for N3G001W:
- Quick start manual (16 pages) ,
- Setup manual (4 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
Windows 2000 PCs
First, check for the IP protocol and, if necessary, install it:
1.
In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2.
Double-click the Network and Dial-up Connections icon.
In the Network and Dial-up Connections window, right-click the Local Area Connection icon, and then
3.
select Properties.
4.
In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click
Properties
5.
In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an IP
address automatically. Also click the radio button labeled Obtain DNS server address automatically.
6.
Click OK twice to confirm and save your changes, and then close the Control Panel.
Windows Me PCs
1.
In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2.
Click on View All Control Panel Options.
3.
Double-click the Network icon.
4.
The Network Properties dialog box displays with a list of currently installed network components. If the
list includes Internet Protocol (TCP/IP), then the protocol has already been enabled. Skip to step 10.
5.
If Internet Protocol (TCP/IP) does not display as an installed component, click Add...
6.
In the Select Network Component Type dialog box, select Protocol, and then click Add...
7.
Select Microsoft in the Manufacturers box.
8.
Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK. You may be prompted
to install files from your Windows ME installation CD or other media. Follow the instructions to install the
files. If prompted, click OK to restart your computer with the new settings.
Next, configure the PC to accept IP information assigned by the modem:
9.
Follow steps 1 - 3 above.
10.
In the Network Properties dialog box, select TCP/IP, and then click Properties. If you have multiple
TCP/IP listings, select the listing associated with your network card or adapter.
In the TCP/IP Settings dialog box, click the radio button labeled Obtain an IP address automatically.
11.
12.
Click OK twice to confirm and save your changes, and then close the Control Panel.
YML869 Rev1
www.netcomm.com.au
N3G001W 3G Wireless Router User Guide
N3G001W 3G Wireless Router User Guide
13
Advertisement
Table of Contents
