Listen-In Audio - Appendix #6 - Lorex L20WD800 Series Instruction Manual

Listen-in Audio - Appendix #6

Listen-in Audio - Appendix #6
There are 4 available DIN camera ports, 8 available BNC camera ports and 4 BNC Audio ports
on the system - how many can be used for Listen-In audio, and how many can be used to record
sound?
How do I enable Listen-In Audio, and how do I set the Listen-in
channel?
Listen-In Audio is the ability to listen to live audio on ONE channel at a time, between channels
1~4. To listen to live audio on a channel:
1. Enter MENU mode by pressing the MENU button on the front panel of the system (or
on the Remote Control). Select the SYSTEM SETUP Option.
2. Select the SOUND menu from the MAIN menu.
Navigate using the up and down arrows on the
front panel (or remote control). Highlight the
selection in Green, and press the ENTER button
to enter the SOUND Menu.
3. Select the AUDIO Option. Navigate using
the up and down arrows, and press the
ENTER key to select the AUDIO Option:
• Live Audio - Turns Live System Audio
(from the Audio on the terminal) to ON/
OFF.
• Audio Monitoring Channel - Select
the channel
(Channels 1~4 ONLY).
NOTE: Once the LIVE AUDIO Feature has been
set to ON, the Remote Control can be used to
select the Listen-In Audio Channel. Press the
AUDIO button on the Remote Control to switch
between Channels 1~4.
102
for Listen-in Audio