Setting The Recorder's Output Resolution; Listen-In Audio - Lorex D861 Series User Manual

15 Using the Main Menu

15.5.1 Setting the Recorder's Output Resolution

The first time you power up the system and complete the Lorex Setup Wizard, the system will au-
tomatically match the resolution of the connected monitor. You can set the recorder to a different
output resolution at any time.
CAUTION
If you need to switch the monitor used with the system, make sure you set the recorder to an output resolution sup-
ported by the new monitor before switching.
To change the output resolution:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click DISPLAY, then click the Display tab.
3. Set the resolution to match the highest resolution supported by your monitor. For example, se-
lect 3840×2160 for 4K monitors, or 1920×1080 for 1080p.
4. Click Apply. The recorder will restart before changes take effect.
15.5.2 Listen–In Audio
Enable and set volume for camera audio feeds in the Live View display.
#LX400111; r. 5.0/56647/56647; en-US 58