Picture Frame Mode - Remote Control Usage - Lorex L20WD800 Series Instruction Manual

Picture Frame Mode - Remote Control Usage

Picture Frame Display
Images will be displayed in Picture Frame Mode (based on
the Menu settings).
NOTE: Press the PIP button to display the DVR in the bot-
tom right corner.
Picture Frame Mode - Remote Control Usage
Listed below is a quick reference for the Remote Control usage in Picture Frame Mode.
1. MODE: Press the Mode Button to display
the Multi-Function Mode Menu.
2. POWER: Press the Power Button to turn
off the Monitor Display. Press and hold the
button for 3 seconds to shut down the entire
system.
3. DVR MODE: Change to DVR Mode.
4. VGA MODE: Change to VGA Mode.
5. RETURN: Exits from a Menu.
6. NAVIGATION: Press the Navigation
Controls to move Up, Down, Left or Right in
the Monitor Menu.
7. PICTURE FRAME SETUP: Displays the
Picture Frame Setup Menu.
8. PICTURE FRAME: Change to Picture
Frame Mode.
9. COMPONENT MODE: Change to
Component Mode.
10. ENTER BUTTON: Press the Enter
Button to select an option in the Monitor
Menu. Also displays the DVR in PIP mode in
the bottom right corner of the screen.
11. PIP MODE: Displays the DVR screen in
the PIP Screen in the lower right corner.
66
1
2
3
4
5
6
1. Mode
2. Power
3. DVR Mode
4.VGA Mode
5. Return Button
6. Navigation Controls
7
8
9
10
11
7. Monitor Setup
8. Picture Frame Mode
9. Component Mode
10. Enter Button
11. PIP Mode