Picture Frame - Menu - Lorex L20WD800 Series Instruction Manual

Picture Frame - Menu

Insert the USB Thumbstick into the USB Port
on the monitor prior to starting Picture Frame
Mode. If a USB Stick is not detected by the
system, the following message occurs:
If the USB Stick does not contain *.jpg files,
the following message will be displayed:
Picture Frame Settings
Once jpg images have been located on the
USB Stick, the Picture frame menu will be
displayed.
NOTE: To display the Picture Frame menu,
press the MENU Button on the front panel of
the System or on the Remote Control.
Picture Frame Settings Menu
• Device: Displays information about the
currently connected Image Device
(USB Thumbstick).
• Dwell Time: Set the time for each picture
to be displayed onscreen (in sequence).
The dwell time can be set between 0
minutes (leave one image onscreen at
all times) up to 60 minutes.
• Aspect Ratio: Set the aspect ratio for
display to 4:3 or 16:9.
• Thumbnail: Click the PREVIEW button
to display the images on the thumbstick
in a Preview Pane.
Use the Navigation Controls on the front
panel or Remote Control, or use the
mouse to select an image.
Click Previous or Next to scroll between
screens containing the images on the
USB Thumbstick.
Press Enter to begin viewing in Picture
Frame Mode.
Picture Frame - Menu
67