Lorex L20WD800 Series Instruction Manual page 108
20” wide screen lcd monitor with built-in digital video recorder
Hide thumbs
Also See for L20WD800 Series:
- Quick start manual (12 pages) ,
- Frequently asked questions manual (24 pages) ,
- Network setup manual (23 pages)
Table of Contents
Advertisement
Setting up Motion Recording - Appendix #9
7. The Schedule Window will be
displayed, with the Motion Time
blocks displayed as highlighted
boxes.
8. Press the Return Button several
times to exit the Recording Menus.
Remember to SAVE YOUR
CHANGES!
To check if the unit is recording in Motion, all channels should have a green box on the top right
hand corner. When motion is picked up it will change to a red box with a yellow M.
Continuous & Motion
This system has an Advanced Recording Feature where BOTH Continuous and Motion can be
set to ON at the same time:
• The system will record continuously, but when motion
is detected the system will display a M recording type
on the relevant channel.
• The event will be logged as Motion in the system
archive.
• This is useful in situations where you want to have
continuous recording, but wish to have Motion
detected for easier event searching.
• In addition, an e-mail notification can be sent when
Motion has been detected.
108
Advertisement
Table of Contents
