Vga Mode - Remote Control Usage - Lorex L20WD800 Series Instruction Manual

VGA Mode - Remote Control Usage

VGA Mode - Remote Control Usage
Listed below is a quick reference for the Remote Control usage in VGA Mode.
1. MODE: Press the Mode Button to display
the Multi-Function Mode Menu.
2. POWER: Press the Power Button to turn
off the Monitor Display. Press and hold the
button for 3 seconds to shut down the entire
system.
3. DVR MODE: Return to DVR Mode.
4. VGA MODE: Change to VGA Mode.
5. RETURN: Exits from a System Menu.
6. NAVIGATION: Press the Navigation
Controls to move Up, Down, Left or Right in
the Monitor Menu.
7. VOL +/-: Increase or Decrease the
volume of the camera currently broadcasting
live audio.
8. MONITOR SETUP: Displays the Monitor
Setup Menu.
9. PICTURE FRAME: Change to Picture
Frame Mode.
10. COMPONENT MODE: Change to
Component Mode.
11. ENTER BUTTON: Press the Enter
Button to select an option in the Monitor
Menu. Also displays the DVR in PIP mode in
the bottom right corner of the screen.
12. PIP MODE: Displays the DVR screen in
the PIP Screen in the lower right corner.
62
1
2
3
4
5
6
7
1. Mode
2. Power
3. DVR Mode
4.VGA Mode
5. Return Button
6. Navigation Controls
8
9
10
11
12
7. Volume +/-
8. Monitor Setup
9. Picture Frame Mode
10. Component Mode
11. Enter Button
12. PIP Mode