Lorex L20WD800 Series Instruction Manual page 106
20” wide screen lcd monitor with built-in digital video recorder
Hide thumbs
Also See for L20WD800 Series:
- Quick start manual (12 pages) ,
- Frequently asked questions manual (24 pages) ,
- Network setup manual (23 pages)
Table of Contents
Advertisement
Setting Auto-Recording to OFF - Appendix #8
Setting Multiple Time Blocks
1. Enter MENU mode by pressing the MENU button
on the front panel of the system, remote control
or mouse menu. Select the RECORD MENU
Option.
2. Select the SIMPLE RECORDING MODE menu.
Navigate using the up and down arrows on the
front panel (or remote control). Navigate using
the arrow keys
3. Select the Channel Menu (highlights the area in
PINK).
4. Press the ENTER key to enter the configuration mode.
One time block will be highlighted in GREEN.
5. Navigate to the desired time block and press
ENTER. The selected time block will be
highlighted ORANGE. Press the UP, DOWN,
LEFT and RIGHT Arrow keys to highlight
multiple time blocks.
6. Press Enter once more to access the Configuration Menu.
Select NONE, CONTINUOUS, MOTION or ALARM by
pressing the UP and DOWN arrows. Press ENTER again
to accept the change.
106
Advertisement
Table of Contents
