What is included in the box? Table of Contents What are the features? ...Error! Bookmark not defined. What is included in the box? ... 3 How do I Startup / Shutdown the system? ... 4 What do the buttons and connectors on the monitor mean? ... 5 How do I connect DIN cameras to the system? ...
What is included in the box? What is included in the box? The system comes with the following components: HARD DRIVE SIZE AND CAMERAS VARY BY SPECIFIC MODEL. PLEASE REFER TO YOUR PACKAGE FOR CONTENT DETAILS. CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
What is included in the box? How do I Startup / Shutdown the system? System Loading Sequence • Press the POWER button located on the front panel of the System to start the unit, or press the Power Button on the Remote Control. •...
How do I connect DIN cameras to the system? How do I connect DIN cameras to the system? 1. Connect the female end of the supplied DIN extension cable to the camera. 2. Connect the male end of the supplied DIN extension cable to an open DIN camera input on the back of the System.
How do you connect BNC cameras to the system? 1. Connect the Extension cable to the Camera and System: A. Connect the Barrel Power connector to a power adaptor. B. Connect the BNC connector to an available BNC Port of the System. C.
How do I connect DIN cameras to the system? What is DVR Mode and how do I use is? DVR Mode is the primary mode for the System, and is displayed when the system is powered on. In DVR Mode, the system performs the following functions: •...
How do I use the Remote in DVR Mode? 1. MODE: Press the Mode Button to display the Multi-Function Mode Menu. 2. POWER: Press the Power Button to turn off the Monitor Display. Press and hold the button for 3 seconds to shut down the entire system. 3.
How do I connect DIN cameras to the system? How do I use the On-Screen Display Menu? The On-Screen Display Menu is accessed by either: • Pressing the Up or Down Arrows on the Front Panel <OR> • Right Clicking the Mouse The Menu options include: 1.
What do the icons on the System Display mean? 1. Camera Title 2. Network Indicators • Green: Indicates that the network connection is stable. • Blue: Indicates that the network connection is experiencing difficulties. • Red: Indicates that the network connection is not strong. 3.
How do I connect DIN cameras to the system? What are the Display Modes, and how do I use them? Cameras can be displayed in several different modes by pressing the Display Button on the Remote Control or Mouse Menu A Display Selection window will appear onscreen.
What is PIP and how do I use it? PIP means “Picture In Picture”. VGA/Component Mode/Picture Frame: When using the PIP function, the DVR screen is displayed in the PIP Video Display DVR Mode: When using the PIP function, the VGA or Component screen is displayed in the PIP window (referred to as Reverse PIP).
Page 14
How do I connect DIN cameras to the system? VGA Mode Note: When in VGA, Component, or Picture Frame Mode, the PIP window will only display DVR Mode. Reverse PIP (DVR Mode) Mouse : • Right Click the screen • Select the PIP option •...
Page 15
Remote Control: • Push the PIP button once to display the VGA (computer) screen in the PIP • Push the PIP button again to display the Component (DVD) in • Push the PIP button again to close the PIP window DVR Mode Benefits! Business:...
What is DVR Mode? What is DVR Mode? DVR (Digital Video Recorder) Mode is the default mode, and it gives access to the system menus. How do I access DVR Mode? To access DVR Mode (from any other Mode): Remote: 1.
What is VGA Mode? VGA Mode is used to display a device (i.e. a Computer) connected to the VGA Port on the monitor. If you press the PIP button on your remote control, you can view your DVR in a Picture In Picture.
How do I access and use VGA Mode? How do I access and use VGA Mode? To access VGA Mode: Remote: 1. Press the VGA Button on the Remote Control -or- 2. Press the Mode button on the Remote Control. 3.
What is Component Mode? Component Mode is used to display a device connected to the Component green, blue, and red inputs (Y/Pb/Pr) in high resolution (i.e. DVD Player, Set Top Box, Satellite Receiver) The Audio from the Component Device is connected to the Red and White component audio inputs. If you press the PIP button on your remote control, you can view your DVR in a Picture In Picture.
How do I access and use Component Mode? How do I access and use Component Mode? To access Component Mode: Remote: 1. Press the COMPONENT Button on the Remote Control -or- 2. Press the Mode button on the Remote Control. 3.
What is Picture Frame Mode? Picture Frame Mode is used to display JPG images located on a USB Thumbstick (connected to a USB Port on the side of the monitor). If you press the PIP button on your remote control, you can view your DVR in a Picture In Picture.
How do I access and use Picture Frame Mode? How do I access and use Picture Frame Mode? To access Picture Frame Mode: Remote: 1. Press the PICTURE FRAME Button on the Remote Control -or- 2. Press the Mode button on the Remote Control. 3.
What is Installation Guide Mode? Displays the system installation video (12 minutes) How do I access Installation Guide Mode? How to access Installation Guide Mode: Remote: 1. Press the INSTALLATION GUIDE Button on the Remote Control -or- 2. Press the Mode button on the Remote Control. 3.
Page 24
It’s all on the web Product Information User Manuals Quick Start Guides VISIT www.lorexcctv.com Lorex Technology Inc. Specification Sheets Software Upgrades Firmware Upgrades www.lorexcctv.com...