Using The Intercom (Two-Way Audio); Intercom Volume - Lorex LW2750 Series User Manual

8 Using the System
3. Press again to exit digital zoom.

8.5 Using the Intercom (Two-way Audio)

Use the Intercom feature for two-way communication between the receiver and the cam-
era. Talk and listen to persons near the camera from behind closed doors for added
security.
Note
Please make sure the camera(s) is properly connected prior to using the Intercom.
To use the Intercom:
1. Select the desired camera in full-screen mode (press
channel).
2. Press and hold on the top panel of the receiver.
3. Talk in a normal speaking voice close to the LCD screen (approximately 12 in. / 30 cm).
4. Release the button to hear audio from the camera.

8.6 Intercom Volume

The two-way audio volume is different from the alarm / buzzer volume found in the Main
Menu ( > Alert).
To change two-way audio volume:
• From single-channel view, press
The volume icons on the screen indicate the volume of sound coming from the cameras:
Note
You cannot adjust the volume of the camera speakers.
#LX400011; r. 1.0/11916/13451; en-US
to change the displayed
/ to change the two-way audio volume.
17