Understanding printer menus
Menu item
Annotations
Do Not Print
Print
PostScript menu
Menu item
Print PS Error
Off
On
Lock PS Startup Mode
Off
On
Font Priority
Resident
Flash/Disk
Image Smoothing
Off
On
PCL Emul menu
Menu item
Font Source
Resident
Disk
Download
Flash
All
Description
Prints annotations in a PDF
Note: Do Not Print is the factory default setting.
Description
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Enables users to disable the SysStart file
Note: Off is the factory default setting.
Establishes the font search order
Notes:
•
Resident is the factory default setting.
•
This menu item is available only if a formatted flash memory option card
or printer hard disk is installed and operating properly.
•
Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
Enhances the contrast and sharpness of low‑resolution images and smooths
their color transitions
Notes:
•
Off is the factory default setting.
•
Image Smoothing has no effect on images that are 300 dpi or higher in
resolution.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•
Resident is the factory default setting. It shows the factory default set of
fonts downloaded in RAM.
•
Flash and Disk settings show all fonts resident in that option. Make sure
the flash option is properly formatted and is not read/write‑, or
password‑protected.
•
Download shows all the fonts downloaded in RAM.
•
All shows all fonts available to any option.
231