Lexmark X792de User Manual page 227

Understanding printer menus
Menu item
Enhance Fine Lines
Off
On
Color Saver
Off
On
RGB Brightness
‑6 to 6
RGB Contrast
0–5
RGB Saturation
0–5
Color Balance
Cyan
‑5 to 5
Magenta
‑5 to 5
Yellow
‑5 to 5
Black
‑5 to 5
Reset Defaults
0
Description
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
• Off is the factory default setting.
• You can set this option from the software program. For Windows users, click
File > Print > Properties > Preferences > Options, or Setup. For Macintosh users,
choose File > Print, and then adjust the settings from the print dialog and pop‑up
menus.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in a browser window.
Reduces the amount of toner used for graphics and images. The amount of toner used
for text is not reduced.
Notes:
•
Off is the factory default setting.
•
On overrides Toner Darkness settings.
Adjusts brightness in color outputs
Notes:
• 0 is the factory default setting.
‑6 is the maximum decrease. 6 is the maximum increase.
•
•
This does not affect files where CMYK color specifications are being used.
Adjusts contrast in color outputs
Notes:
•
0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
Adjusts saturation in color outputs
Notes:
•
0 is the factory default setting.
•
This does not affect files where CMYK color specifications are being used.
Adjusts color in printed output by increasing or decreasing the amount of toner being
used for each color
Note: 0 is the factory default setting.
227