Chapter 6. Defining Study Setups - Kaye Validator AVS User Manual

Chapter 6.
Before you can run a qualification study, you must use the Validator AVS software to
create or modify a setup. A setup defines everything required to calibrate sensors and
run a qualification study.
Note: To create or modify a setup, you must have permissions established by your
System Administrator in the Admin menu (User Management tab).
The setup is accessed from the Asset Details screen, through the Setup pane. When
creating a setup:

Define the number and type of sensors to be used in the Qualification
study

Assign sensors to groups and generate a wiring diagram

Specify calculations and define group events to be monitored during the
qualification study

Specify calibration and verification setpoints

Specify temperature stability and deviation criteria for sensor calibration
and verification

Specify start and stop conditions for qualification and exposure cycle

Define output relays
Kaye Validator AVS User Manual
Defining Study Setups

Chapter 6. Defining Study Setups

79