Kaye Validator AVS User Manual page 123

Historical data is represented by data packages with the timestamp the data was
recorded. The size of the data packages can be set in the drop-down to display 1, 2, 4-
, 6-, 12-, and 24-hours duration. If a data package is selected, the graph automatically
switches to the Historical mode.
The following functions are available in historical mode:

The headline of the graph changes from Real-Time data to Historical
data.

Use Zoom to zoom and navigate inside the displayed data package.

The groups selection functionality is identical to the real-time view, only
the selected group and corresponding calculations are displayed.

Use Manual Scale to extend the scale of the X-axis to a set displayed
time.

Select a data package to directly display it.

A line in the Graph can be used to navigate to any timestamp in the
graph and see the time and calculation data displayed for that specific
timestamp.

When selecting the Sensor Value in Table checkbox the calculation
window is replaced by the sensor readings for the timestamp selected
with the selection line.

With the Arrows, it is possible to navigate between data chunks.

The Double Arrow on the left navigates directly to the first data chunk.

The Double Arrow on the right navigates to the live data screen and the
headline of the graph displays real-time data.
Pressing List View switches back to a sensor reading table view.
Kaye Validator AVS User Manual
Chapter 8. Qualification Study
112