Kaye Validator AVS User Manual page 151


User comments entered when action was taken.

Validator AVS hardware serial number of units affected.

Validator AVS Console Machine ID to identify from which Console action
was initiated.
Use the drop downs above the header to find date specific data over a range and
select the Get Data button. Select Reset to remove the date filter from the data.
There are two ways to generate Audit Trail Reports. For a detailed and flexible
analysis, navigate to the Audit tile from the Main screen. When initially opening the
Audit Trail tile, the Audit Trail displays data from the current monthly file. Use the
dropdowns above the header to modify the monthly range and select Get Data. Each
column of the Audit Trail contains a filter icon allowing data to be filtered by User ID,
Name, Date and Time, Action, User Comment, Console Machine ID, and RT hardware
serial number.
The second method of generating an audit report is tied specifically to a Qualification
file through the Reporting tool. From the Asset screen, select the desired Asset, then
the desired Qualification file. Define the cycles and proceed to the Standard reports
Kaye Validator AVS User Manual
Figure 96: Audit Trail
Chapter 11: Qualification Reports
140