Study Setup - Kaye Validator AVS User Manual

1.5.1. Study Setup

The study setup defines everything required to calibrate sensors and run a
qualification study. When you create a setup, you:

Define the number and type of sensors to be used in a Qualification
Study

Assign sensors to groups (Distribution / Penetration) for reporting and
calculations purposes.

Define group events to be monitored during the qualification study.

Specify calibration setpoints, temperature stability, and deviation
criteria for sensor calibration and verification.

Specify start and stop conditions for the qualification cycle and the
exposure cycle.

Specify data storage rate. All calculations are based on storage rate.

Define the output relays.
After you have created and saved your setup, you run the study by loading the setup
via connection from your Console to the Validator AVS. See also the Validator AVS
online help for instructions on setting up a study.
Kaye Validator AVS User Manual
Chapter 1. The Kaye Validator AVS
6