Subscribe to Our Youtube Channel
Related Manuals for Taiden TSW-5300MX
Summary of Contents for Taiden TSW-5300MX
- Page 1 New Generation Digital Infrared Wireless Conference System TSW-5300MX Control Tool User's Manual V 1.3...
-
Page 2: Important Instructions
This product conforms to the rules of the European directive 2014/30/EU If any detailed information needed, please contact your local agent or TAIDEN service center in your region. Any feedback, advice or suggestion about the products is appreciated. ... -
Page 3: Table Of Contents
Contents Chapter 1. Installation and running ................... 2 1.1 Overview ..........................2 1.2 Running Environment ......................2 1.3 Software Installation ......................2 1.4 Software Running ......................... 2 Chapter 2. Operation ......................3 2.1 Connection with device ......................3 2.2 Inputs and Outputs setting under Sync mode ................4 2.3 Uplink signal and downlink signal setting under Async mode ............. -
Page 4: Chapter 1. Installation And Running
Chapter 1. Installation and running 1.1 Overview TSW-5300MX Control Tool is used for setup rout up signal and down signal of HCS-5300MX/20 Digital IR Conference Room Switcher. This PC control tool needs no installation 1.2 Running Environment Control PC Requirements: ... -
Page 5: Chapter 2. Operation
Chapter 2. Operation 2.1 Connection with device Step 1. Connect PC and HCS-5300MX/20 Digital IR Conference Room Switcher with a straight serial port cable, the Pin description of the RS232 DB9 connector of the HCS-5300MX/20 is as bellow: Figure 2.1 Cable connection with HCS-5300MX/20 Step 2. -
Page 6: Inputs And Outputs Setting Under Sync Mode
2.2 Inputs and Outputs setting under Sync mode When the work mode of HCS-5300MX/20 is set as Sync [synchronous mode], the settings of inputs and outputs is synchronous for TX and RX Figure 2.3 Inputs and Outputs setting for Sync mode Step 1. -
Page 7: Uplink Signal And Downlink Signal Setting Under Async Mode
2.3 Uplink signal and downlink signal setting under Async mode When the work mode of HCS-5300MX/20 is set Async [asynchronous mode], inputs and outputs of Downlink signal (TX) and Uplink Signal (RX) can be set separately: Figure 2.4 Uplink signal and downlink signal rout setting Step 1. - Page 8 TAIDEN INDUSTRIAL CO., LTD. 6/F, Block B, Future Plaza, 4060 Qiaoxiang Rd, Nanshan District, Shenzhen, China P.C.: 518053 Website: http://www.taiden.com Last Revision: 04/2024 Copyright © 2023-2024 TAIDEN Industrial Co., Ltd. All Rights Reserved.
Need help?
Do you have a question about the TSW-5300MX and is the answer not in the manual?
Questions and answers