Contents Important Safety Instructions ...................... II Installation & User Guide ......................IV Chapter 1 Overview ........................1 Chapter 2 Feedback Suppressor....................2 2.1 Functions and instructions ..........................2 2.2 Connection ................................ 3 2.3 Specifications ..............................4 Chapter 3 TSW-0202DP ......................5 3.1 Overview ................................
Page 3
To protect your hearing, avoid high pressure level on earphones. Adjust to a lower and convenient level. If any detailed information is needed, please contact your local agent or TAIDEN service center in your region. Any feedback, advice and suggestion about the products is appreciated TAIDEN is the registered trademark of TAIDEN Co., Ltd.
Service Center. vases, shall be placed on the apparatus. The MAINS plug serving as a disconnection device, 20. All TAIDEN products are guaranteed for definite time (see the WARRANTY CARD for details) excluding the should be easy to operate. The apparatus should be connected to the MAINS...
Page 5
Important Safety Instructions The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: To reduce the risk of fire or electric shock, DO NOT expose units to rain or moisture.
This manual is a comprehensive guide to the installation operation TAIDEN HPA-0202DP/20 Feedback Suppressor. It includes the detailed description of the functions and interfaces of the device, including connection and operation, the installation and use of the parameter setting tool (TSW-0202DP) and so on.
Chapter 1 Overview The HPA-0202DP/20 is a dedicated audio feedback Line In/Out: Use for Live audio signal input/output suppressor local remote conferencing, VCS In/Out: Use for Teleconferencing audio featuring two inputs (LINE IN and VCS IN) and two signal input/output ...
Chapter 2 Feedback Suppressor 2.1 Functions and instructions Front panel Rear panel Figure 2.1 Feedback Suppressor 1.Power switch 6.Line in interface 2.Line in gain control with indicator 7.VCS in interface When the input signal exceeds “-23dBV”, the 8.Line out interface indicator will turn to green;...
2.2 Connection Note: when starting up, it is recommended to turn on the HPA-0202DP/02 first, and then turn on the power amplifier; when shutting down, it is recommended to turn off the power amplifier first and then turn off the HPA-0202DP.
1) Double click "TAIDEN TSW-0202DP Tool": 2) To connect the device for the first time, use the USB adapter cable to connect the Type-C USB of the HPA-0202DP/20 back panel to the USB port of the computer, after connecting, the USB port will be converted to a virtual serial port, select the serial port and baud rate to connect the device, please refer to 3.6 System setting...
3.4 Channel setting Figure: Channel setting Level indication: channel input and output audio level indication; AFC: displays the status of the AFC setting, and the suppression level can be set after the dip switch on the back panel of the machine turns on the AFC function; ...
3.5 System setting Figure: System setting Connect type: after the device is connected to the computer via the USB cable, it is converted to a serial connection; Serial Port: select the serial port to which the device is connected; ...