Taiden HCS-8600 Series Installation And Operating Manual
  1. Manuals
  2. Brands
  3. Taiden Manuals
  4. Conference System
  5. HCS-8600 Series
  6. Installation and operating manual

Taiden HCS-8600 Series Installation And Operating Manual

Paperless multimedia congress system
Hide thumbs Also See for HCS-8600 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Paperless Multimedia Congress System
Installation and Operating Manual
V 1.0

Advertisement

Table of Contents
loading

Related Manuals for Taiden HCS-8600 Series

Summary of Contents for Taiden HCS-8600 Series

  • Page 1 Paperless Multimedia Congress System Installation and Operating Manual V 1.0...
  • Page 2  To protect your hearing, avoid high pressure level on earphones. Adjust to a lower and convenient level. If any detailed information is needed, please contact your local agent or TAIDEN service center in your region.  Any feedback, advice and suggestion about the products is appreciated.
  • Page 3 TAIDEN Service Center. should be easy to operate. The apparatus should be connected to the MAINS 20. All TAIDEN products are guaranteed for definite time (see the WARRANTY CARD for details) excluding the socket-outlet with protective earth.
  • Page 4 Important Safety Instructions The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: To reduce the risk of fire or electric shock, DO NOT expose units to rain or moisture.

  • Page 5: Table Of Contents

    Contents Installation & User Guide ......................VII Chapter 1. Introduction ....................... 1 1.1 Summary ..................................1 1.2 System equipment ..............................10 1.2.1 Congress main unit (CMU) ............................10 1.2.2 Contribution units ..............................10 1.2.3 Interpreter unit ................................10 1.3 Application software ..............................10 1.4 Functions and features ..............................
  • Page 6 5.1.1 Connection principles .............................. 111 5.1.2 Connection between the CMU/EMU and the contribution units ................113 5.1.3 Connection between HCS-8600 series congress system and automatic video tracking system ......114 5.1.4 Connection between HCS-8600 series Congress System and Conference Sign-in System ........115 5.2 Basic configuration of congress system ........................
  • Page 7 Chapter 8 Technical specifications ..................147 8.1 System specifications ..............................147 8.2 Congress system main unit ............................148 8.2.1 Congress main unit ..............................148 8.2.2 Extension main unit ..............................150 8.2.3 Extension unit ................................151 8.3 Congress unit ................................152 8.3.1 HCS-8668 series congress terminal ........................

  • Page 8: Installation & User Guide

    Digital Congress System. Chapter 2：Congress main unit Detailed descriptions of the functions and indications, installation and connection, configuration and operation of the HCS-8600 series fully digital congress main unit (CMU), extension main unit (EMU) and the extension unit (HCS-8600MES). Chapter 3：Congress unit...
  • Page 9 Installation & User Guide This manual is applicable to:  Congress Unit  Congress main units HCS-8668 Series: HCS-8600MA HCS-8668ACE chairman unit Fully Digital Congress System Main Unit (discussion, voting, 64 delegate unit HCS-8668ADE CHs, single-mode optical fiber interface, AES/EBU digital Paperless Multimedia Congress Terminal (14"...
  • Page 10 Installation & User Guide chairman unit HCS-8638BCE  Congress PoE Network Switcher delegate unit HCS-8638BDE HCS-8600POE Paperless Multimedia Congress Terminal (10" 1920×1200 LCD, Congress PoE Network Switcher (supports PoE, KMX mode for capacitive touch panel, camera with 8 megapixel, speech, voting, HCS-8668/8638 series multimedia terminal, Normal mode for 64 CHs, paperless conference functions, video conversation, HCS-8665 series multimedia terminal and HCS-1082N series...
  • Page 11 Installation & User Guide  Earphone EP-830 Single earphone EP-820AS Single earphone EP-822 Single earphone EP-823L Single earphone (left, TRS connector, Ring: NC) EP-823R Single earphone (right, TRS connector, Ring: NC) EP-960AN Interpreter headset (for HCS-8685) EP-960BH Interpreter headphone HCS-5100PA Headphone...

  • Page 12: Chapter 1. Introduction

    Chapter 1. Introduction 1.1 Summary The world's first paperless multimedia congress system, based on the paperless multimedia conference developed by TAIDEN as early as in 2010, has ushered (mMediaCongress operation platform with in a new era for the conferencing industry. TAIDEN independent intellectual property rights.
  • Page 13 Figure 1.1.1 HCS-8668 Series Paperless Multimedia Figure 1.1.2 HCS-8638 Series Paperless Multimedia 14" 1920×1080 10" 1920×1200 Congress Terminal ( Congress Terminal ( Figure 1.1.3 Design sketch of HCS-8668 Series Paperless Multimedia Congress System...
  • Page 14 Figure 1.1.4 HCS-8668 Series Paperless Multimedia Congress System connection diagram...
  • Page 15 Figure 1.1.5 HCS-8668 Series Paperless Multimedia Congress System connection diagram (POE) Primary interface Microphone Management Short Message Vote result display Simultaneous interpretation Speech text guidance - setting Media Documents reader Call service...
  • Page 16 Video conversation Take photo Video display Desktop sharing Network Figure 1.1.6 User Interfaces of Paperless Multimedia Congress System Features of HCS-8600 series Paperless Multimedia Congress Terminal: ■ Full functionality and high integration Cat.5e/Cat.6 cable. GMC-STREAM fully Various types of systems that may be involved in...
  • Page 17 ■ Integrated voice enhance and howling suppression simultaneous interpretation, video tracking intercom function. function for each microphone to improve sound To solve above-mentioned shortcomings, TAIDEN effects ■ 2 audio line in (Line/Dante) + 2 AES in (AES/Dante) successfully developed proprietary CongressMatrix...
  • Page 18 The microphones in area n are arranged in group n and avoids howling caused by audio feedback. correspond to group n audio output. For HCS-8600 Series Paperless Multimedia Congress The loudspeakers in area n correspond to group n System, integrating CongressMatrix technology, the audio output (as shown in figure 8).
  • Page 19 Figure 1.1.7 Area groups of the venue Figure 1.1.9 HCS-8600 Series Paperless Multimedia Congress System connected to a multi-channel audio amplifier with “N-1” function to cancel howl 3. Duplicate and backup connection via “Closed improvement of the system reliability by means of Loop - Daisy Chain”...
  • Page 20 (except paperless multimedia terminal) are supplied by system the Congress Main Unit’s 8P-DIN interface. Since the The power management protocol of HCS-8600 series power capacity of the 8P-DIN interface is limited, it Congress Main Unit is open, enabling remote switch...

  • Page 21: System Equipment

    Once the PC installed and the TAIDEN conference stand-alone mode without a PC, the CMU carries out management software integrated into the DCS, the basic management facilities. By operating TAIDEN operator manages centrally all aspects of the congress conference management software in PC-controlled centrally.

  • Page 22: Functions And Features

    ■ The first Paperless Multimedia Congress System in ■ Connection facility for additional condenser or the world dynamic microphones, expanding user’s application ■ Based on TAIDEN independent intellectual property spectrum mMediaCongress platform, never subject to viral ■ Integrated USB interfaces in the Congress Main Unit infection, hacker-proof, safe and reliable for system upgrading and saving system parameters.

  • Page 23: Chapter 2 Congress Main Unit (Cmu)

    Chapter 2 Congress main unit (CMU) The congress main unit (CMU) forms the core of the Product types: HCS-8600 Series Paperless Multimedia Congress HCS-8600MA System. It provides power supply to contribution units Fully Digital Congress System Main Unit (discussion, voting, 64...

  • Page 24: Fully Digital Congress System Main Unit

    2.1 Fully Digital Congress System Main Unit 2.1.1 Functions and instructions Front panel of HCS-8600M CMU Backside of HCS-8600MA CMU Backside of HCS-8600MBU CMU Backside of HCS-8600M CMU Figure 2.1.1 HCS-8600M series congress main unit...
  • Page 25 Figure 2.1.1 1. “STANDBY” button with indicator 7. Contribution units (CU) connection LED  When output works properly (≥ 1 CU connected), a. Switches to red in standby mode; b. Switches to blue when operating. LED will flash; when no CU is connected, LED is 2.

  • Page 26: Connection

    2.1.2 Connection 2.1.2.1 To contribution units HCS-8600 series CMU has 2 outlet (8P-DIN) trunk-line cable sockets for connecting to contribution units. TAIDEN full digital congress unit has two types of connection interface, a) equipped with two cables with standard 8P-DIN connectors; or b) equipped with two...
  • Page 27 CMU/EMU, a Cat5e cable can be used. One end of topology (RJ45) the Cat5e cable is connected to output of the main unit In HCS-8600 series fully digital congress system, via the CBL8P2RJ45S converter cable; the other end power is provided by HCS-8600M CMU (or EMU) for all of the Cat5e cable is connected to the contribution unit.
  • Page 28 2.1.2.3 To fiber device The HCS-8600M series congress main unit has a pair of fiber interfaces, and can be connected to the HCS-8600M series CMU/EMU, HCS-4800M series CMU, HCS-8600MIO series audio input & output device; and two distant meeting rooms (distance can reach tens of kilometers) can be combined as one meeting room.

  • Page 29: Configuration And Operation

    2.1.3 Configuration and operation After installation and connection and prior to the hereinafter means the information displayed on the meeting, the CMU should be configured through the LCD as the “user” interface. dialog menu and button. The term “interface” used The menu structure is shown in the following figure: Figure 2.1.2 LCD menu structure of the CMU...
  • Page 30 A) Starting initialization Menu of HCS-8600MBU: 1. Speaker Volume 2. Line In1 Volume Switch press “STANDBY” button, 3. Line In2 Volume 4. Line Out1 Volume HCS-8600 CMU will start initialization: 5. Line Out2 Volume 6. Max. Active Mics 7. Operation 8.
  • Page 31 b). Press the function knob to enter the volume Operation Mode adjustment interface; Set the microphone mode “OPEN”, “OVERRIDE”, c). Rotate function knob to adjust Line In1/2 volume; “VOICE”, “APPLY” or “PTT”. d). Press the function knob to save and return to upper level menu.
  • Page 32 Audio Mode Network Setting set audio mode for main unit, normal mode, “Network” includes submenus: teleconferencing mode or external process mode “IP Address” optional. “Subnet Mask”  Normal mode: all input sources can be output “Gateway” through all the output channels; “DHCP”...
  • Page 33  If “Enable” is selected, slave CMU will backup b). Rotate function knob to select "Disable" or "Enable"; master CMU automatically during the meeting  Disable: disable DHCP, set network address and process. If master CMU stops, slave CMU will subnet mask manually;...
  • Page 34 c). Select number of booths e). Select interlock mode in a booth Select interlock mode in a booth, includes: “OVERRIDE” “INTERLOCK” Rotate function knob to switch between 0-63. Usually, one language will take one booth.  If “0” is selected, it stands for no SI function, press function knob to save and return to main 1).
  • Page 35 2). Select channel C language for booth 1: “NONE” or “ALL”; 2). Rotate function knob to select auto-relay booth quantity and press function knob to go to the next step; 3). If ALL is selected for C then rotate function knob to select language for B from those languages that have been selected in step b) 3).
  • Page 36 12. Screensaver d). Rotate the function knob to adjust the value; e). Press the function knob to save the value; Set LCD screen saver for main unit. f). Repeat steps b)~e) and set the other numbers; g). Rotate the function knob to "Return" and press the function knob to return to upper level menu.
  • Page 37  Press the function knob to return to upper level 14. Test menu. Its submenu includes: “Key Test” “LED Test” Note:  When transmit video from internal encoder to HCS-8668SC/SD, please enable "Ext. Port send video" and "DIN P.2 to HCS-8600POE" at the same time;...

  • Page 38: Configuration And Operation - Slave Mode

    16. About c). Press function knob to save and return to the upper level menu. information includes: firmware version, corporation information and series number, shown as Note: in the following figure - press function knob to return to  When power down the main unit, please press upper level menu.
  • Page 39 Network Setting: same as this menu operation in the main mode; Language Setting: same as this menu operation in the main mode; Screensaver: same as this menu operation in the main mode; Audio Output: enable/disable audio output on the rear panel of the CMU. In the conference room About Dante: same as this menu operation in the combination, must enable the audio output, if not, main mode;...

  • Page 40: Web Control

    2.1.5 Web Control HCS-8600M series of congress main unit build in web control functions, can be viewed and controlled by any computer via input IP address in the browser. Including MU State, Parameters, Audio Output, Unit Setup, Video Matrix, Predefine Position, Microphone Control, Assets Management, System Test, Main Unit Translation and Unit Upgrade.
  • Page 41  Active Microphones: set the maximum number of active microphones: 1~8 optional. If the active number reaches the limit, other delegate microphones cannot be activated, while the chairman and VIP unit(s) can be activated at any time (the setup only affects the delegate units). Whatever may be the operation mode, the maximum number of active microphones cannot exceed eight.
  • Page 42 Main Unit Parameters:  Disconnect PC and allow chairman to control Request: when PC disconnected, chairman unit can approve/overrule delegates request;  Use Extension Port: select whether use extension port or not;  Use Fiber Port: select whether use fiber port or not; ...
  • Page 43  Audio Input Based on TAIDEN originated CongressMatrix technology, supports 2 audio line in (Line/Dante) + 2 AES in (AES/Dante) + 2 USB in (USB/Dante) +2 Dante in, or 1 audio line in (Line/Dante) + 1 microphone input + 2 AES in (AES/Dante) + 2 USB in (USB/ Dante) +2 Dante in, gain and EQ for each input adjustable separately.
  • Page 44 ♦ Line 2: two input sources can be selected (Line In 2, Dante In 4), the default option is Line In 2, set Gain (range: -30 dB ~0 dB) and EQ (5 band, range: -15 dB ~15 dB), display real-time level; ♦...
  • Page 45  Audio Output Based on TAIDEN CongressMatrix technology, supports 26 audio outputs. Line/AES Out 1~2: 31 band graphical EQ + Limiter +Delay, the maximum delay time is 1000 ms; GroupOut 1~6: 15 band graphical EQ + Limiter +Delay, the maximum delay time is 1000 ms;...
  • Page 46 Audio mode - External Processor Mode: Line In 1 input source can be output through down-stream audio channel, other input sources can be output normally through 26 output channels, as shown in the following figure: Line In 1 input source does not output from each output channel ♦...
  • Page 47 ♦ 8 band PEQ: USB Out 1~2 and Dante Out 1~16 support the 8 band parametric equalizer; ♦ Limiter: double click it to open setting interface; Bypass: disabled limiter; If enabled limiter:  Threshold: when the volume of the microphone is higher than the threshold value, the volume will be compressed according to the compression ratio;...
  • Page 48  Down Stream: adjust downlink audio, including loudspeaker volume, downlink bass setting, downlink treble setting, and downlink threshold level setting: ♦ Mixer: select audio input source, the microphone audio of the conference unit is output from the downstream audio by default; Line In 1~2, AES In 1~2, Dante In 1~2 and USB In 1~2 can select whether to output from the downstream audio, and the output volume ratio can be set by adjusting the gain;...
  • Page 49 ♦ Main Interface Setting Button: visible or invisible setting button in the main interface; ♦ Enable Wide Dynamic Mode: allows the microphone to pick up more dynamic sound; ♦ Mic. Gain Boost (Dante and USB): boost congress unit’s microphone gain when transmitted audio through the Dante network and USB.
  • Page 50  Language: select unit in the left list, locked language range, select language in the drop-down list, and then click the “Setup Unit Language” button to setup the operation language for congress unit except paperless multimedia terminal. If “All Mics.” option is checked, the language setup will be applied to all the units. If select the item of “DCS units lock language”, the operation language cannot be changed freely (include interpreter units).
  • Page 51 Predefine Position Figure: Predefined Position Panorama setup: select proper matrix, camera and predefine position number, then adjust the camera angle by the four direction buttons, and click zoom in/out button to adjust the size of the video image, at last, click “Save and Send to MU” button to save the panorama if the adjustment is done.
  • Page 52 Microphone Control 单击已开启话筒进入预置位界面设置 回全景位 Figure: Microphone control Click the “Mic. Control” to enter the interface. The function icons are: / : turn on/turn off : flash/close flash : track this unit : add to request list : approve/reject request : move up/down Click an opend microphone to adjust position, as in the following figure:...
  • Page 53 System Teat TAIDEN conference system provides the facility for system testing to find out the problems of units accurately. This facility aims to find out and solve the problems prior to a conference to ensure the reliability of the entire conference system.
  • Page 54 Figure: Key Test interface  Mic. Test Test the microphone of the units connected to the conference main unit, and the interface of the following figure is displayed: To begin the test, the user shall first set the test time for each microphone in “Mic. Test Time (00:00:00, HH:MM:SS)”, select “Play Sound”...
  • Page 55  SI Channel Test When SI channel test started, HCS-8685 will play the monitor channel name, and if the channel is not defined in the system, the sound “Floor” will be played. Figure: SI Channel Test interface  LED Test Press the “Start Test”...
  • Page 56 Main Unit Translation Chinese and English are default language for main unit, if other language needed, language item can be translated here one by one, save the language, at last, compile and upload the new language items to the main unit. Select target language Figure: Main Unit Translation Unit Upgrade...
  • Page 57 Menu operation Congress Main Unit:  Select "About" menu;  Turn function knob left to enter Undate DCS Units interface;  Turn function knob to select Yes; Click "Start Upgrading"; Reboot main unit after upgrading.

  • Page 58: Extension Main Unit

    2.2 Extension Main Unit 2.2.1 Functions and instructions Front panel Backside of HCS-8600MEA2 Backside of HCS-8600MEA Figure 2.2.1 HCS-8600MEA series extension main unit Figure 2.2.1: 1. Overload indicator and restart button  Normal: turn off; 4. Fiber input  Overload:red; ...

  • Page 59: Connection

    2.2.2 Connection HCS-8600 series CMU has two 8P-DIN output Each extension main unit has an extension input port interfaces; the power capacity of each 8P-DIN interface for connecting to extension interface of the congress is limited. If the actually needed power of the system...

  • Page 60: Extension Unit

    2.3 Extension Unit 2.3.1 Functions and instructions Figure 2.3.1 HCS-8600 series extension unit Figure 2.3.1: 1. Power input 2. Power light (Red) 3. Extension input  Connecting to CMU or last HCS-8600MES. 4. Extension input indicator 5. Extension output  Connecting to next HCS-8600MES.

  • Page 61: Installation

    2.3.2 Installation The extension unit can be fixed on flat surface (table, wall, ground, etc). Make holes on flat surface according to the following figure, then fixed HCS-8600MES with M3 screws. Figure 2.3.2 Installation of the HCS-8600MES The HCS-8600MES extension unit can also be installed on a standard 19-inch cabinet with a HCS-MES-RCF cabinet mounting bracket.

  • Page 62: Chapter 3 Congress Unit

    Chapter 3 Congress unit 3.1 Overview Congress unit is the common name to describe the HCS-8638 Series: units used by the attendees to contribute to a congress. HCS-8638ACE chairman unit The term includes discussion unit (chairman/delegate), delegate unit HCS-8638ADE voting unit, channel selector etc. Various features are Paperless Multimedia Congress Terminal (10"...

  • Page 63: Hcs-8668/8638 Series Paperless Multimedia Congress Terminal

    3.2 HCS-8668/8638 series paperless multimedia congress terminal 3.2.1 Functions and instructions Front of HCS-8668AC Front of HCS-8668AD Front of HCS-8668BC Front of HCS-8668BD Front of HCS-8668BDD Bottom of HCS-8668 series Figure 3.2.1 HCS-8668 series Paperless Multimedia Congress Terminal Figure 3.2.1： 1.
  • Page 64 5. Flashlight 13. Video source selection 6. Camera 14. Earphone volume control 7. High resolution LCD touch screen 15. Simultaneous interpretation channel selector  14", 16:9, 1920×1080 16. Microphone On/Off/Request state indicator  The indicator state is the same as that of the 8.
  • Page 65 Front of HCS-8638AC Front of HCS-8638AD Front of HCS-8638BC Front of HCS-8638BD Side of HCS-8638 series Bottom of HCS-8638 series Figure 3.2.2 HCS-8638 series Paperless Multimedia Congress Terminal Figure 3.2.2： 1. Priority key with indicating light (for chairman request list (deny all delegates request to speak);...
  • Page 66  Delegate unit: 11. Contactless IC Card slot  The slot is configured on the side of the terminal; Work state Indicating light  Built-in contactless IC-Card slot to place the IC Microphone On Red (on) card, while automatically logout once the card is First in request list Green (flash) taken out from the slot.

  • Page 67: Fixed Installation

    3.2.2 Fixed Installation Figure 3.2.3 Fixed installation of HCS-8668 series congress unit Figure 3.2.4 Fixed installation of HCS-8638 series congress unit...

  • Page 68: Connection

    Congress Terminals (not PoE) HCS-8668/8638 series Paperless Multimedia Congress Terminal is based on the TAIDEN originated HCS-8668/8638 series paperless multimedia congress GMC-STREAM Gigabit Multimedia Congress Stream terminals are “daisy-chained” with Cat.5e/Cat.6 cable. technology. All audio and video signals are transmitted When connecting to the next terminal, just connect the Cat.5e/Cat.6...
  • Page 69 Figure 3.2.7 Daisy-chain connection between HCS-8668/8638 series Paperless Multimedia Congress Terminals...

  • Page 70: Operation

    Icons and fonts on primary interface can be defined by to be configured by the operator, including: numbering user through “Taiden Update Manager” tool, details and testing. During the meeting, the participators use refer to the user manual of “Taiden Update Manager” multimedia terminals sign-in, activate tool.
  • Page 71 B. “Override” mode Note:  Active microphone number limitation (1/2/3/4)  When numbering, please number the multimedia NOT reached: terminals one by one and do NOT press When the microphone On/Off icon is pressed, “number” key of several terminals at the same the speaker can give his/her speech;...
  • Page 72 E. “PTT” mode C) Main menu  Active microphone number limitation (1/2/3/4) Not reached: Pressed and hold the microphone On/Off icon to activate the microphone. The speaker can give his/her speech; Microphone will deactivated when microphone On/Off icon is released. ...
  • Page 73 A. Text Chat 1. Microphone Double click on the delegate to exchange text Including “Microphone List”, “Layout” and “Setting”. information. When the text information has been received, prompting information will be displayed on A. Microphone List the LCD. Click the "Read" button to read the text or Delegates (including chairman unit, delegate unit, VIP click the "Ignore"...
  • Page 74 When the request for video conversation has been accepted, the video user interface of the following figure is displayed. The microphone will be activated; the microphone indicator and the microphone On/Off icon will turn red. The videos of both speakers will be displayed on the LCDs.
  • Page 75  PIN code sign-in  Finger Print and PIN Code Sign-in In PIN code sign-in status, the LCD will display as the In finger print and PIN code sign-in status, the LCD will following figure: display as in the following figure: Input PIN code through virtual keyboard to sign in.
  • Page 76  Display voting result When click “Display Result” on application software or multimedia terminal with voting control option, voting result will be displayed on all multimedia terminals in three modes: numeric, bar, pie. B. Voting Terminals can initiate voting (Yes/No/Abstain) via chairman unit without PC and dedicate software module for more forms of voting (2/3/4/5 key and multi-proposal).
  • Page 77  If interpreter units are connected to the CMU, simultaneous interpretation function is available C. Content and the channel selector is activated. The Display the content of the lecture. Click “Guidance” or earphone should be inserted before selecting the “Cancel” button on the LCD to switch guidance or not. language;...
  • Page 78 A. Multimedia - Photos C. Multimedia - Camera You can click "Photos" folder icon to browse pictures, Click the “ ” icon to go to the camera control interface. The delegate can take photo via the built-in supports jpg, bmp and png formats now. Click " "...
  • Page 79 Operation： 9. Browser  Click icon on the top-right corner to switch file display method: list or icons;  Press and hole the file in remote list can select Download/View in pop-up menu;  Press and hole the file in local list can select Upload/Delete/View/Share in pop-up menu;...
  • Page 80 11. Camera There is no audio default for VOD channel. If operator set encoder as “Video and Audio” through video server Click the “Camera” icon to go to the camera control software, you can change the “ ” state to “ ”...
  • Page 81 D. Brightness To prompt the setup interface, please connect the Setup the brightness of the LCD screen. multimedia terminals TAIDEN conference management software, and then select “Setup” – “Multimedia Terminal” – “Switch Interface”. A. Information Display the information of the congress terminal, including: ID, permission, degree, device series, version, MAC address, etc.
  • Page 82 E. InputMethod 2) Calculator Select and set the input method according to the area Build-in calculator. and personal habits. 3) Screenshot 16. Other functions Press “ ” key at the lower right corner of the screen to 1) Memo shot the current screen, the picture (*.png file) was saved in the path: “Multimedia>>Photo”;...
  • Page 83 3.2.3.2 Chairman unit When his/her request is approved, he/she can speak and the last activated microphone will be turn off at the The chairman features all functions a delegate has, same time. additionally: 1. Priority B. Turn off or mute delegate microphone ...
  • Page 84 d. Click the “End” button to finish voting. Voting result will be displayed on LCD (for open voting only) in list, bar, or pie.
  • Page 85 3.2.3.3 Second Chairman Unit “Override”: The second chairman options (microphone control, If the maximal number (1/2/3/4) of active delegate voting control, and desktop sharing control) can be microphones has been reached and if another assigned by file server software, it can be a chairman delegate unit is activated, the delegate unit unit or a delegate unit or different units to carry out switched on first will be switched off first...
  • Page 86 B. Microphone control 2. Voting (controlled by PC) a. Click the “Vote” icon to go to voting interface on voting control unit, including “Sign-in”, “Vote” and “Proposal”: b. Click “Start Sign-in” to start sign-in and all congress units will go to sign-in status; Please sign-in according...
  • Page 87 of “Last key-press mode” voting, delegates who did already vote can vote again;  Display Result: display voting result on the LCD of every congress terminal and on large screen(s) in the meeting room (with dual-head VGA adaptor equipped);  Name List: display name list on the LCD of every congress terminal and on large screen(s) in the ...
  • Page 88  If not select “Forcible Display”, delegates can exit desktop sharing temporarily by pressing the yellow button on the pop-up dialog; and can enter desktop sharing again by press Sharing --> Enter desktop sharing.

  • Page 89: Hcs-8665 Series Compact Multimedia Congress Terminal

    3.3 HCS-8665 series compact multimedia congress terminal 3.3.1 Functions and instructions Front of HCS-8665CE Front of HCS-8665DE Front of HCS-8665MON Rear Figure 3.3.1 HCS-8665 series Compact Multimedia Congress Terminal Figure 3.3.1 1. Earphone jack (Ø 3.5 mm) 9. Built-in Hi-Fi loudspeaker ...
  • Page 90 11. Microphone On/Off key with indicating light (for chairman unit) Microphone/request key with indicating light (for delegate unit):  Chairman unit: press this key to activate microphone and indicating light;  Delegate unit: Work state Indicating light Microphone On Red (on) First in request list Green (flash) Not first in request list...

  • Page 91: Fixed Installation

    3.3.2 Fixed installation Figure 3.3.2 Fixed installation of HCS-8665 series congress unit...

  • Page 92: Connection

    An external earphone can be connected to the external HCS-8665 series Multimedia Congress Terminal is earphone jack at the lateral sides of the multimedia based on the TAIDEN originated GMC-STREAM Gigabit terminal. Its volume is adjustable by the earphone Multimedia Congress Stream technology. All audio and volume control key.

  • Page 93: Operation

    3.3.4 Operation  IC-Card sign-in Before a meeting starts, the congress terminals need to In IC-Card sign-in status, “Insert IC Card” will be be configured by the operator, including: numbering displayed on the OLED screen. Put the contactless and testing. During the meeting, the participators use IC-Card into the slot.
  • Page 94 (refer to section 2.1.3); displayed on large screen(s). c. When the microphone is activated, it can be turned off by pressing the microphone On/Off 4. Voting key. Voting can be originated by TAIDEN conference  Active microphone number limitation (1~8) management system software.
  • Page 95 1080P60 1080P50 1080P30 1080P25 8. VIP unit  Any delegate unit can be assigned as a VIP unit by the TAIDEN conference management system software;  As long as the active microphone capacity is not full, the microphone of the VIP unit can be activated freely;...
  • Page 96 3.3.4.2 Chairman unit The chairman unit features all the functions of a 4. Voting delegate unit, and the following additional functions: Chairman unit cannot originate voting without a PC:  Nominative or ballot voting are available; 1. Priority  “First key-press valid” or “Last key-press valid” are ...

  • Page 97: Hcs-8635 Series Compact Multimedia Congress Terminal

    3.4 HCS-8635 series compact multimedia congress terminal 3.4.1 Functions and indications Front of HCS-8635CE Front of HCS-8635DE HCS-8635 side HCS-8635 backside Figure 3.4.1 HCS-8635 series compact multimedia terminal Figure 3.4.1: 1. Priority key with indicating light (for chairman 2. Microphone On/Off key with indicating light (for unit only): chairman unit) ...
  • Page 98 6. Multi-function keys with indicating light (5 keys): 8. Simultaneous interpretation channel selector  In different modes, the corresponding indicating  Available when earphone is plugged. lights blink; press the corresponding key to 9. Earphone volume control execute operation (refer to table 3.4.1 for details); 10.

  • Page 99: Installation

    3.4.2 Installation Figure 3.4.2 Fixing of HCS-8635 series compact multimedia congress terminal...

  • Page 100: Connection

    3.4.3 Connection 3.4.3.1 Connecting to the CMU or the EMU HCS-8635 series congress terminal equipped with two RJ45 sockets supports daisy chain connection via cat5e cable. When connecting the CMU to the contribution units, the CBL8P2RJ45 converter cable is needed to connect the the first unit to the socket of the CMU.
  • Page 101 3.4.3.4 External earphone An external earphone can be connected to the external earphone jack of the congress terminal. Its volume can be adjusted by the earphone volume control button. The external earphone shall have a Ø 3.5 mm plug, as in the following figure: Functions and indications: Left stereo channel signal...

  • Page 102: Operation

    3.4.4 Operation  IC-Card sign-in Before a meeting starts, the economical multimedia terminals need to be configured by the operator, In IC-Card sign-in status, “Please Use IC Card” will be including: numbering and testing. During the meeting, displayed on the LCD. Push the contactless IC card the participators use the multimedia terminal to sign-in, into the IC card slot, a welcome interface will be activate microphone, request to speak, vote, read...
  • Page 103 Speaker’s video can be exported to and c. When the microphone is activated, it can be displayed on large screen(s). turned off by pressing the microphone On/Off key. 4. Voting Voting can be originated by TAIDEN conference  Active microphone number limitation (1~8) management system software.
  • Page 104  When the earphone is pulled out, the LCD will not display the simultaneous interpretation information anymore. 6. Volume control  The volume of the built-in loudspeaker can be adjusted by the master volume control knob on the main unit; ...
  • Page 105  Brightness Set brightness of LCD screen. C. “Call” The earphone shall be plugged to use the intercom  Video Input function. If not, it will remind you to plug the earphone. Enable/disable video input. Select “Call” and press the Yes key to enter the sub-menu, then the following interface is shown.
  • Page 106 8. VIP unit  Any delegate unit can be assigned as a VIP unit by the TAIDEN conference management system software;  As long as the active microphone capacity is not full, the microphone of the VIP unit can be activated freely;...
  • Page 107 3.4.4.2 Chairman unit 4. Voting The HCS-8635C chairman unit features all the functions of a delegate unit, and the following HCS-8635C chairman unit cannot originate voting additional functions: without a PC:  When controlled application software, 1. Priority nominative or ballot voting are available; ...

  • Page 108: Chapter 4 Interpreter Unit

    Chapter 4 Interpreter unit Simultaneous interpretation function of HCS-8600 series congress unit is designed for the requirements of large scale multilingual international congresses: it can provide up to 64 language channels (64 CHs). HCS-8685 interpreter unit is equipped with a 6.8” TFT LCD, a 64-channel selector, a built-in loudspeaker, a pluggable microphone, headset sockets, etc.

  • Page 109: Functions And Indications

    4.1 Functions and indications Front Side Bottom Figure 4.1 HCS-8685 Interpreter unit...
  • Page 110   When the monitor channel shortcut switch button Listening area: (1/2/3/4/5/6/7) was pressed, push the function knob Loudspeaker/earphone control: to go to channel 1, turn the function knob to select 1. Loudspeaker volume control knob the interpretation channel; 2. Built-in Hi-Fi loudspeaker ...
  • Page 111 ** asks for help” will be displayed on the LCD of Special configuration: operator unit. Braille 13. Slow key (SLOW)  Ergonomic design with features for visually  If selected “Allow Slow” and set the requisite impaired. number by application software (Control – Booth Manage.

  • Page 112: Connection

    4.2 Connection 4.2.1 Connecting to the CMU or the EMU For “Closed Loop - Daisy Chain” ring connection, HCS-8685 interpreter unit is equipped with a cable with a HCS-8600MCLS Loop switcher is needed. The "TO MU" standard 8P-DIN male connector. When connecting the port of HCS-8600MCLS is connected to the output of the CMU to the contribution units, just connect the male main unit via CBL8P2RJ45 converter cable;...

  • Page 113: External Earphone

    Functions and indications: Left stereo channel signal Right stereo channel signal Power ground/Shield External microphone signal Figure 4.6 “Daisy-chain” connection between HCS-8685 Interpreter units 4.2.3 External earphone An external headphone can be connected to the TRRS jack at the lateral side of the Interpreter unit. Its volume can be adjusted by the earphone volume control knob.

  • Page 114: Setup

    4.3 Setup To realize the simultaneous interpretation function, the interpreter unit should be incorporated in the congress Example: system and they should be setup before the meeting. Booth 1 is for translation between English/Chinese. Any operating status of the interpreter unit will be Output channel A is English, output channel B is Chinese, displayed on the LCD.
  • Page 115 Figure 4.7 Direct interpretation Figure 4.8 Relay interpretation Figure 4.9 Schematic diagram of the connection of interpreter units...

  • Page 116: Lcd Configuration Menu

    4.3.2 LCD configuration menu When the “Interpretation setup” has been configured in the CMU, and then the interpreter unit must be configured:  If the interpreter unit has not been configured, the LCD will display “UNIT NOT INSTALLED”; In the following operation: ...
  • Page 117 If you select App, press the Function button to open Compressor QR code interface, scan the QR code according to you On or Off compressor. phone or pad to download Taiden SI tool App. After installation, you can send message to all or part booths via Bluetooth. Setting Input Pincode first before enter setting interface, 1).
  • Page 118 Blue：...

  • Page 119: Other Configuration

    4.3.3 Other configuration 4.2.4.3.3 Interlock mode 4.2.4.3.1 Input channel configuration Interpretation mode can be setup by menu operation The HCS-8685 equipped with 7 pre-select buttons on the main unit (refer to section 2.1.3): (1/2/3/4/5/6/7) for relay languages with activation Interlock mode between booths： indication on the LCD.

  • Page 120: Operation

    4.4 Operation 4.4.1 Operation of listening area 6. Quality indication: The second line of the display The listening area, on the left side of the unit, is the shows the qualities of the interpretations on the area used to monitor the floor or the interpretation channels that are assigned to the pre-select buttons channels.

  • Page 121: Operation Of Speaking Area

    4.4.2 Operation of speaking area 6. “HELP” button: If selected “Allow Help” by The speaking area, on the right side of the unit, is the application software (Control – Booth Manage. – area which is used to distribute the interpretation Param.

  • Page 122: Chapter 5 System Connection And Basic Setup Procedure

    Note: meeting flexibly.  The added up cable lengths between a main In this chapter, the connections of HCS-8600 series fully unit and the most remote congress unit must digital congress system are introduced by diagrams and not exceed 250 m;...
  • Page 123 Table 5.1.1 Quick lookup table of HCS-8600M CMU/EMU load capability (each outlet) The extension cable length between the CMU(EMU) and the first Congress Unit Type Type No. connected to the socket 20 m 40 m 60 m 80 m HCS-4890N/80 Equipped with 4.3”...

  • Page 124: Connection Between The Cmu/Emu And The Contribution Units

    5.1.2 Connection between the CMU/EMU and the contribution units HCS-8600 series congress units (except HCS-8668/ the Gigabit network switcher via a Cat.5e/Cat.6 cable. 8638/ 8665 series congress terminals) feature a 1.5 m For connecting the congress terminals to the Gigabit 8P-DIN standard male plug cable and a 0.6 m 8P-DIN...

  • Page 125: Connection Between Hcs-8600 Series Congress System And Automatic Video Tracking System

    5.1.3 Connection between HCS-8600 series congress system and automatic video tracking system HCS-8600 series fully digital congress system can be The video tracking system is composed of video switcher, connected to an automatic video tracking system. For button board and high-speed dome camera.

  • Page 126: Connection Between Hcs-8600 Series Congress System And Conference Sign-In System

    5.1.4 Connection between HCS-8600 series Congress System and Conference Sign-in System Conference Sign-in System (CSS, untouched) aims at (user can choose as needed), meanwhile, personalized providing the reliable, effective and convenient congress portrait and design can be printed onto the surface of the sign-in solution for various large congress.

  • Page 127: Basic Configuration Of Congress System

    This system is composed of one HCS-8600MA, one including chairman unit and delegate units). The HCS-8600MEA, four HCS-8685 Interpreter units, ten connection diagram is shown in the following figure: HCS-48U10/80 series discussion units (flush-mounting, Figure 5.2.1 Connection example of HCS-8600 series congress system...
  • Page 128 According to the requirements of the specific case in this 2. Configurate Interpreter units in booth 1 (the section, the configuration is as the following: configuration of both Interpreter units is the same) 1. Configuration CMU a) Channel B output: pressing output channel B switch and rotating Primary knob at the same time, and set a) Active microphone number limitation: active Chinese as channel B output language.

  • Page 129: Chapter 6 Peripherals And Accessories

    Chapter 6 Peripherals and accessories HCS-8600MIO Audio Input & Output Device HCS-8600MIO series audio input & output device:  Can adjust the level of any channel  The whole machine can work in input or output mode,  When the EXTENSION1 interface is set in PC mode, and can also work in input and output mode at the it can be used for network audio transmission, same time;...
  • Page 130 Figure 6.1.1: 1. “STANDBY” button with indicator 7. USB_D port  Reserved. a. Switches to red in standby mode; b. Switches to blue when operating. 8. RS-232 port  The “COM” port is used for connecting to a central 2. Menu display LCD ...

  • Page 131: Connection

    6.1.2 Connection HCS-8600MIO converts the digital audio signals of the 2. Audio cables are required to connect the "AUDIO congress system to multi channel audio signals, for OUTPUT" analog audio output interfaces further processing in infrared simultaneous interpretation HCS-8600MIO to the "AUDIO INPUT" audio input systems or recording devices.

  • Page 132: Configuration And Operation

    6.1.3 Configuration and operation When installation and connection are finished and prior b. Booth Comb. Mode: to the meeting, HCS-8600MIO Audio Input & Output Type Booth Comb. Mode Device should be configured by front panel menu operation. In this section, we take the HCS-8600MIO/16AD as an example to introduce its menu operation.
  • Page 133 3) Press the function knob to set number (at this time, "Extension 1 Port";  If you select Booth Comb., press the function knob the number bold display); 4) Rotate the function knob to adjust the value; to restart the device and the settings will take effect. 5) Press the function knob to save the value;...
  • Page 134 6.1.3.5 About Dante 6.1.3.8 About Display Dante information, including device name, Dante Display the information of the HCS-8600MIO audio input version and device version. Press the function button to & output device, including software version, serial return to the upper level menu. number.

  • Page 135: Web Page - Si Mode

    6.1.4 Web page - SI Mode The HCS-8600MIO series audio input & output device has a built-in web control function. You can access the device IP address to view and set parameters through any computer, mobile phone or tablet. HCS-8600MIO series audio input & output devices have three working modes: All output, All input and Input/Output. The parameter settings of each working mode can be saved as a scene, and when used again, the scene settings are called directly.
  • Page 136 Click on the icon in the upper-left corner of the channel to adjust channel parameter settings, including PEQ and DRC. Figure: Audio parameter setting - PEQ Figure: Audio parameter setting - DRC...
  • Page 137 All input: input multiple digital / analog audio signals to the SI channel or floor channel of the conference system, realize remote simultaneous interpretation. Figure: SI mode - MI mode Channel index Channel name, can be modified Input source, 3-pin phoenix interfaces can be used as line input or microphone input Real-time level display...
  • Page 138 Figure: Audio parameter setting - Normal Figure: Audio parameter setting - PEQ Figure: Audio parameter setting - DRC...
  • Page 139 Input/Output: it is used as audio input and audio output. The input channel setting is the same as the All input mode above, and the output channel setting is the same as the All output mode above. Figure: SI mode - Input/Output mode MI &...
  • Page 140 Enable Input Channel index Channel name, can be modified Input source, 3-pin phoenix interfaces can be used as line input or microphone input Real-time level display Gain adjust Red highlight indicates: input muted Turn on phantom power for Mic. if needed Remote Output Channel index Channel name, can be...
  • Page 141  Only one device can work in teleconference mode if more than one HCS-8600MIO series audio input & output devices cascade;  If HCS-8600MIO enabled teleconference, the HCS-8600MIO audio (MIO TC In) as an audio input channel (occupied USB In2) of congress main unit;(TC: abbreviation for teleconference); ...
  • Page 142 Figure: SI Mode - Parameters setting 6.1.4.2 Booth Combine mode The HCS-8600MIO series audio input & output device cooperates with the HCS-8685BM booth management, which can realize the online interpreter booth management. Here you can view and configure the device parameter and server parameter.

  • Page 143: Hcs-8600Kmx

    6.2 HCS-8600KMX HCS-8600KMX is designed based on the Gigabit Multimedia Congress Stream technology, and is used to connect the congress main unit, the HCS-8668/8638 series Paperless Multimedia Congress Terminals, external Ethernet switches, etc. The build-in PoE switch is used to select power supply method. 6.2.1 Functions and instructions Front panel Rear panel...

  • Page 144: Connection

    6.2.2 Connection One RJ45 standard ports for connection with external 3×2P aviation plugs. If power supply from 3×2P aviation Ethernet switches, communication with the conference plugs, 5×RJ45 standard ports support “Daisy-chain” management system, media management platform, etc. connection and “Closed Loop” connection, and the 5×RJ45 standard ports...
  • Page 145 Figure 6.2.3 HCS-8668 Series Paperless Multimedia Congress System connection diagram (POE)

  • Page 146: Hcs-8600Poe

    6.3 HCS-8600POE HCS-8600POE is designed based on the Gigabit series E-ink electronic nameplate, external Ethernet Multimedia Congress Stream technology, and is used to switches, etc. At the same time, it supports power for connect the congress main unit, the HCS-8668/ units.

  • Page 147: Connection

    Connection diagram of HCS-8600POE is shown in the connection to HCS-8665MON Multi-channel Video figure below, one HCS-8600POE works on KMX mode Monitors. for connection to HCS-8668 series Paperless Multimedia Congress Terminals, and the other HCS-8600POE for Figure 6.3.2 HCS-8600 Series Congress System connection diagram...

  • Page 148: Hcs-8368T(/50)

    6.4 HCS-8368T(/50) When the system is connected with HCS-8600POE or HCS-8600KMX working in PoE mode, HCS-8368T(/50) is used to expand the number of unit connections, and each interface can only connect to one unit. 6.4.1 Functions and instructions HCS-8368T HCS-8368T/50 Figure 6.4.1 HCS-8368T Distributor Figure 6.4.1: 1.

  • Page 149: Microphone

    6.5 Microphone Direction:  Removable stem microphone Functions and instructions: 1. Electret condenser cardioid microphone 2. Two-color microphone on/off LED ring (default) Indicating light Work state of LED ring Microphone On Red (on) Speaking time limit Red (flash)  First in request list Green (flash) MSXXEGB series pluggable stem microphone Not first in request list...
  • Page 150 a. Prepare a straight screwdriver; b. Insert the straight screwdriver into the gap of the microphone and press the straight screwdriver. The M-model windshield will be separated from the stem microphone.  HCS-1020 clip microphone...

  • Page 151: Earphone

    6.6 Earphone  EP-960BH Interpreter headphone The jack plug of the stereo headphone can be inserted into a Ø 3.5 mm stereo headphone jack socket. Applicable types include:  EP-830 Single earphone  EP-960HD Detachable Earshells  EP-820AS Single earphone ...

  • Page 152: Accessories

    6.7 Accessories Some dedicated accessories are involved in the connection of conference system devices. Herein, these accessories are introduced, including: ♦ CBL8PSD dedicated 8-pin Extension Cable ♦ CBL8PPD-02 dedicated 8-pin Extension Cable ♦ CBL4PK-01CMP power adapter cable ♦ CBL4PT-02ACMP power branch cable ♦...
  • Page 153 Detachable 4P-DIN Standard Plug (male)  For soldering to 4P-DIN cable  Removable DIN standard male connector (4PIN) Detachable 4P-DIN Standard Plug (female) 10. CBL8P2RJ45S-01 8-pin to RJ45 converter cable  For soldering to 4P-DIN cable  Suitable for HCS-4800 series and HCS-8600 ...
  • Page 154  Each 8PIN output interface can drive 80-meter 13. CBLRJ45 Ethernet Extension Cable long extension cable  Used for HCS-4800 series, HCS-8600 series and  h × w × d: 35 × 149 × 90 mm education equipment  Cable: FTP CABLE with drain wire ...
  • Page 155  "TO MU" socket for connection to the primary CMU or EMU  The other socket for connection to the secondary CMU or the congress unit  HCS-MCLS-RCF HCS-MCLS-FC and can be chosen  h × w × d: 40 × 100 × 68 mm 19.

  • Page 156: Chapter 7 Working Environment And Maintenance

    The covers should only be removed attention to: by qualified service personnel. If any repair or  maintenance is required, contact the TAIDEN Terminating and maintenance of optical fiber should be carried out by strictly trained technical service center in your region.

  • Page 157: System Operator Room

     In the hall, booths should be set up at the back or sideways.  Booths should be elevated to provide an overall, unobstructured direct view of the chairman, the speakers and any other relevant visual aids.  A window should be installed at the forefront of the booth across the overall length.

  • Page 158: Chapter 8 Technical Specifications

    Chapter 8 Technical specifications 8.1 System specifications System performance Conforms to ISO 22259, the international standard for congress systems System environmental conditions Working conditions fixed/stationary/transportable Temperature range: - Transport: -40 °C to +70 °C - Operating: 0 °C to +45 °C Max.

  • Page 159: Congress System Main Unit

    8.2 Congress system main unit 8.2.1 Congress main unit Physical characteristics 8.2.1.1 Types HCS-8600M series Installation Tabletop / standard 19-inch rackmount Dimensions (mm) Color Black (PANTONE 419 C) Weight 7.9 kg Electrical characteristics 8.2.1.2 Types HCS-8600M series ≤4096 Microphone capacity Channels 64 CHs 30 - 20000 Hz...
  • Page 160 Types HCS-8600M series >1 kΩ Output load 9 PIN，D-type female head, connecting the central control system main unit Control interface RJ45 Ethernet, connecting to PC Maximum power consumption 500 W Connection Dedicated cable (8-PIN) Connector DIN8P with buckle...

  • Page 161: Extension Main Unit

    8.2.2 Extension main unit 8.2.2.1 Physical characteristics Types HCS-8600MEA series Installation Tabletop / standard 19-inch rackmount Dimensions (mm) Color Black (PANTONE 419 C) 3.6 kg Weight Electrical characteristics 8.2.2.2 Types HCS-8600MEA series Mains power supply AC 100 V - 240 V 50/60 Hz >1 kΩ...

  • Page 162: Extension Unit

    8.2.3 Extension unit 8.2.3.1 Physical characteristics Types HCS-8600MES Installation Tabletop Dimensions (mm) Color Black (PANTONE 419 C) Weight 1.5kg 8.2.3.2 Electrical characteristics Types HCS-8600MES Mains power supply AC 100 V - 240 V, 50 Hz / 60 Hz >1 kΩ Output load Maximum power consumption 200 W...

  • Page 163: Congress Unit

    8.3 Congress unit 8.3.1 HCS-8668 series congress terminal Physical characteristics 8.3.1.1 Types HCS-8668 series Installation Tabletop Dimensions (mm) Color Black (PANTONE 419 C) 2.5 kg Weight Electrical characteristics 8.3.1.2 Types HCS-8668 series Output frequency response 30 - 20000 Hz >16 Ω Earphone load Earphone volume 13 mW...

  • Page 164: Hcs-8638 Series Congress Terminal

    8.3.2 HCS-8638 series congress terminal 8.3.2.1 Physical characteristics Types HCS-8638 series Installation Tabletop Dimensions (mm) Black (PANTONE 419 C) Color Weight 1.7 kg Electrical characteristics 8.3.2.2 Types HCS-8638 series 30 - 20000 Hz Output frequency response >16 Ω Earphone load Earphone volume 13 mW Earphone output...

  • Page 165: Hcs-8665 Series Congress Terminal

    8.3.3 HCS-8665 series congress terminal 8.3.3.1 Physical characteristics Types HCS-8665 series Installation Tabletop Dimensions (mm) Color Black (PANTONE 419 C) Weight 2.5 kg Electrical characteristics 8.3.3.2 Types HCS-8665 series Output frequency response 30 - 20000 Hz >16 Ω Earphone load Earphone volume 10 mW Ø...

  • Page 166: Hcs-8665Mon Series Congress Terminal

    8.3.4 HCS-8665MON series congress terminal 8.3.4.1 Physical characteristics Types HCS-8665MON Installation Tabletop Dimensions (mm) Color Black (PANTONE 419 C) Weight 2.5 kg 8.3.4.2 Electrical characteristics Types HCS-8665MON Max. power consumption 14 W Connection Cat.5e/Cat.6 cable Video input HDMI Screen size 14", 16:9 Resolution 1920×1080...

  • Page 167: Hcs-8635 Series Congress Terminal

    8.3.5 HCS-8635 series congress terminal 8.3.5.1 Physical characteristics Types HCS-8635 series Installation Tabletop Dimensions (mm) Color Black (PANTONE 419 C) 1.7 kg Weight Electrical characteristics 8.3.5.2 Types HCS-8635 series Output frequency response 30 - 20000 Hz >16 Ω Earphone load Earphone volume 10 mW Earphone output...

  • Page 168: Interpreter Unit

    8.4 Interpreter unit 8.4.1 Physical characteristics Type HCS-8685 Installation Tabletop Dimensions (mm) Champagne (PANTONE 401 C) Color Weight 1.1 kg 8.4.2 Electrical characteristics Output frequency response HCS-8685 Earphone load 30 - 20000 Hz >16 Ω Earphone volume Earphone output Audio level is adjusted automatically according to impedance Headset connection Ø...

  • Page 169: Peripheral Equipment And Accessories

    8.5 Peripheral equipment and accessories 8.5.1 HCS-8600MIO series Physical characteristics 8.5.1.1 Type HCS-8600MIO/16AD HCS-8600MIO/08A HCS-8600MIO/08D Installation Tabletop / standard 19-inch rackmount Dimensions (mm) Black (PANTONE 419 C) Color Weight 3.6 kg Electrical characteristics 8.5.1.2 Type HCS-8600MIO/16AD HCS-8600MIO/08A HCS-8600MIO/08D Channels 16 CHs 8 CHs 8 CHs Frequency response...

  • Page 170: Hcs-8600Kmx

    8.5.2 HCS-8600KMX 8.5.2.1 Physical characteristics Type HCS-8600KMX Installation Tabletop / standard 19-inch rackmount Dimensions (mm) Color Black (PANTONE 419 C) Weight 3.6 kg 8.5.2.2 Electrical characteristics Type HCS-8600KMX Mains power supply 100 - 240 V，50/60 Hz 3 × 2P aviation plugs, supply power to HCS-8668/8638 series Paperless Multimedia Congress Power output Terminals RJ45 ports, support PoE...

  • Page 171: Hcs-8600Poe

    8.5.3 HCS-8600POE 8.5.3.1 Physical characteristics Type HCS-8600POE Installation Tabletop / standard 19-inch rackmount Dimensions (mm) Color Black (PANTONE 419 C) 3.6 kg Weight Electrical characteristics 8.5.3.2 Type HCS-8600POE Mains power supply 100 - 240 V，50/60 Hz Power output RJ45 ports, support PoE Maximum power 350 W consumption...

  • Page 172: Hcs-8368T(/50)

    8.5.4 HCS-8368T(/50) 8.5.4.1 Physical characteristics Type HCS-8368T(/50) Installation Tabletop HCS-8368T Dimensions (mm) HCS-8368T/50 Dimensions (mm) HCS-8368T: gray (PANTONE 425 C) Color HCS-8368T/50: black (PANTONE 419 C) Weight 0.4 kg Electrical characteristics 8.5.4.2 Type HCS-8368T(/50) Mains power supply 48 V DC 1.875 A Maximum power consumption 90 W...

  • Page 173: Microphone

    8.5.5 Microphone 8.5.5.1.Physical Characteristics Types MS33EGB1S/B MS41EGB1S/B MS47EGB1S/B Installation Insert microphone and tighten Length 330 mm 410 mm 470 mm Color Silver (PANTONE 428 C) / Black (PANTONE 419 C) Weight 91 g 98 g 105 g Types MS33EGF1S/B MS41EGF1S/B MS47EGF1S/B Installation Insert microphone and tighten...

  • Page 174: Earphone

    8.5.6 Earphone  Frequency response of headphone: 20 Hz to 20  EP-830 single earphone  Used with interpretation receiver or on a Sensitivity of headphone: ≥108 dBA/1 mW  conference unit  Polar pattern of microphone: Omnidirectional  Hi-Fi sound quality ...

  • Page 175: Accessories

     For soldering to 4P-DIN cable  Length: 1 m  Removable DIN standard female connector (4PIN)  CBLRJ45 Ethernet Extension Cable  Used for HCS-4800 series, HCS-8600 series and  Solderable 4P-DIN Standard Socket education equipment  For soldering to 4P-DIN cable ...
  • Page 176   "TO MU" socket for connection to the primary Cat.5e Extension Cable  For embedding system cables CMU or EMU  Cable: FTP CABLE with drain wire  The other socket for connection to the  Cable conductor: 4x2x(7x0.2)+7x0.2 secondary CMU or the congress unit ...

  • Page 177: System Connection

    8.6 System connection 8.6.1 Mains cables Blue Neutral Brown Hot (Phase) Green/Yellow Earth/Ground 8.6.2 Audio cables 3-pole XLR connector (female) Pin 1 Earth Pin 2 Signal + Pin 3 Signal - Chinch connector (male) Pin 1 Signal + Pin 2 GND 8.6.3 Earphone 3.5 mm Jack plug Tip (1) Signal left...

  • Page 178: Display Language List

    8.7 Display language list Chinese English Chinese English 639-3 639-2/5 639-1 639-3 639-2/5 639-1 原声 爱尔兰语 Floor Irish 阿尔巴尼亚 哈萨克语 Albanian Kazakh 阿拉伯语 吉尔吉斯语 Arabic Kirghiz 保加利亚语 老挝语 Bulgarian 加泰罗利亚 蒙古语 Catalan Mongolian 汉语 尼泊尔语 Chinese Nepali 捷克语 塔吉克语 Czech Tajik 丹麦语...
  • Page 179 Chinese English Chinese English 639-3 639-2/5 639-1 639-3 639-2/5 639-1 奥里亚语 茨瓦纳语 Oriya Tswana 旁遮普语 乌尔都语 Panjabi Urdu 罗曼什语 威尔士语 Romansh Welsh 梵文 祖鲁语 Sanskrit Zulu 信德语 壮族语 Sindhi Zhuang Sinhala / 僧加罗语 傣族语 Sinhalese Southern Sotho / 梭托语 维吾尔语 Uighur Sotho 斯瓦西里语...

  • Page 180: Appendices：custom-Made Cables

    Appendices：Custom-made cables AppendixⅠ: Ethernet Cable...

  • Page 181: Appendix Ⅱ: Cbl4Pk-01 Power Adapter Cable

    Appendix Ⅱ: CBL4PK-01 Power Adapter Cable...

  • Page 182: Appendix Ⅲ: Cbl4Pt-02 Power Branch Cable

    Appendix Ⅲ: CBL4PT-02 Power Branch Cable...

  • Page 183: Appendix Ⅳ: Cbl4Ps 4-Pin Extension Cable

    Appendix Ⅳ: CBL4PS 4-pin Extension Cable...
  • Page 184 TAIDEN INDUSTRIAL CO., LTD. 6/F, Block B, Future Plaza, 6060 Qiaoxiang Rd, Nanshan District, Shenzhen, China P.C.: 518053 Copyright by TAIDEN Website: http://www.taiden.com Last Revision: 06/2021...

This manual is also suitable for:

Hcs-8668acHcs-8668adHcs-8668bcHcs-8668bdHcs-8668bddHcs-8638ac ... Show all

Table of Contents