Supplied Accessories; Fuse Replacement - Icom IC-M410BB Instruction Manual

11
CONNECTIONS

■ Supplied accessories

NOTE: Some accessories may not be supplied, or the shape may be diff erent,
depending on the transceiver version.
Self-tapping screws
(5 × 20 mm)
Spring washers (M5)
Flat washers (M5)
DC power cable

■ Fuse replacement

One fuse is installed in the supplied DC power cable. If the fuse blows or the transceiver
stops functioning, track down the source of the problem, repair it, and replace the
damaged fuse with a new one of the proper rating.
83
GPS antenna and double-sided adhesive pad
(Except for the IC-M410BB USA version)
Command microphone
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
Warning sticker
(For only the USA version)
For Command microphone
Connection cable*
Mounting base
Black
Yellow
Microphone hanger
* The OPC-1540 has external speaker leads,
as shown above.
(Yellow: Speaker (+), Black: Speaker (–))
Fuse Coding explanation
Fuse Coding:
Fuse Voltage Rating: 250 Volts
Fuse Current Rating: 10 Amperes
Connector cap
Self-tapping screws
(3 × 16 mm)
F 250 V 10 A