Print Reports - HP FAX 1250 Series User Manual

Hp fax-1250: user guide
Table of Contents

Advertisement

Print reports

You can set up the HP Fax to print error reports and confirmation reports
automatically for each fax you send and receive. You can also manually print system
reports as you need them; these reports provide useful system information about the
HP Fax.
By default, the HP Fax is set to print a report only if there is a problem with sending or
receiving a fax. A confirmation message that indicates whether a fax was successfully
sent appears briefly on the display after each transaction.
Print fax confirmation reports
Print fax error reports
Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either
Fax Send
or
The default fax confirmation setting is Off. This means that the HP Fax will not print a
confirmation report for each fax sent or received. A confirmation message indicating
whether a fax was successfully sent appears briefly on the display after each
transaction.
To enable fax confirmation from the control panel
1.
Press Setup.
2.
Press 1, and then press
This selects
3.
Press
Off
On Fax Send
On Fax Receive
Send &
Receive
Print fax error reports
You can configure the HP Fax so that it automatically prints a report when there is an
error during transmission or reception.
User Guide
Send &
Receive.
1
again.
Print Report
and then selects
to select one of the following, and then press OK.
Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
Prints a fax confirmation report for every fax you send.
Prints a fax confirmation report for every fax you receive.
Prints a fax confirmation report for every fax you send and
receive.
Tip
If you choose
On Fax Send
to send from memory, you can include an image of the first page of the fax
on the
Fax Sent Confirmation
press 2. Select
On
from the
Fax
Confirmation.
or
Send &
Receive, and scan your fax
report. Press Setup, press 1, and then
Image on Fax Send Report
On
menu.
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents