Fax Setup - HP FAX 1250 Series User Manual

Chapter 3
If the HP Fax loses power for more than 72 hours, you might need to reset the date
and time.
To set the date and time
1. Press Setup.
2. Press 5, and then press 3.
This selects
3. Enter the month, day, and year by pressing the appropriate numbers on the
keypad. Depending on your country/region setting, you might enter the date in a
different order.
4. Enter the hours and minutes.
5. If your time is displayed in the 12-hour format, press
The new date and time settings appear on the display.
Adjust the volume
The HP Fax provides three levels for adjusting the
Phone Line Monitor
The ring volume is the volume of the phone rings. The beep volume is the level of
button press and error beeps. The default
The Phone Line Monitor Volume
default Phone Line Monitor Volume
To adjust the
1. Press Setup.
2. Press 3, and then press 4.
This selects
3. Press
4. Press OK.
To adjust the
1. Press Setup.
2. Press 3, and then press 5.
This selects
3.
Press
4. Press OK.

Fax setup

After completing all the steps in the Setup Guide, use the instructions in this section to
complete your fax setup. Please keep your Setup Guide for later use.
In this section, you will learn how to set up the HP Fax so that faxing works
successfully with equipment and services you might already have on the same phone
line as the HP Fax.
12
Tools and then selects
Volume.
is the volume of dial tones and fax tones. The
Ring and Beep Volume
Basic Fax Setup and then selects
to select one of the options: Soft, Loud, or Off.
Phone Line Monitor Volume
Basic Fax Setup and then selects
to select one of the options: Medium, High, or Low.
Date and Time.
1 for AM, or
Ring and Beep Volume
Ring and Beep Volume
is Medium.
from the control panel
Ring and Beep
from the control panel
Phone Line Monitor
2 for PM.
and the
setting is Soft.
Volume.
Volume.
HP Fax 1250 series