AJAX Hub 2 2G User Manual page 17

Hub 2 (2G) / (4G) User manual | Ajax Systems Support
Active SIM card
SIM card 1
SIM card 2
Ethernet
Average Noise (dBm)
Monitoring Station
https://support.ajax.systems/en/manuals/hub-2/?_ga=2.254320641.824691895.1674290377-1071851791.1672842436
Displays active SIM card:
SIM card 1 — if the :rst SIM card is active.
SIM card 2 — if the second SIM card is active.
You cannot switch between the SIM cards manually.
The number of the SIM card installed in the :rst slot. To
copy the number, click on it.
Bear in mind that the number is displayed if it has been
hardwired into the SIM card by the operator.
The number of the SIM card installed in the second slot.
To copy the number, click on it.
Bear in mind that the number is displayed if it has been
hardwired into the SIM card by the operator.
Internet connection status of the hub via Ethernet:
Connected — the hub is connected to Ajax Cloud via
Ethernet.
Disconnected — the hub is not connected to Ajax
Cloud via Ethernet.
Noise power level at the hub installation site. The :rst two
values show the level at Jeweller frequencies, and the
third — at Wings frequencies.
The acceptable value is 80 dBm or lower. Installing the
hub in places with higher noise levels may lead to loss of
signal from connected devices or noti:cations on
jamming attempts.
The status of direct connection of the hub to the central
monitoring station of the security company:
Connected — the hub is directly connected to the
central monitoring station of the security company.
Disconnected — the hub is not directly connected to
the central monitoring station of the security company.
If this :eld is displayed, the security company uses a
direct connection to receive events and security system
alarms. Even if this :eld is not displayed, the security
21/1/23, 12:56 µµ
Ʃελίδα 17 από 30