Make a call from Contacts
To make calls from the contacts list:
1.
Tap Start > Contacts.
2.
Scroll to the contact name.
3.
Scroll to the number and press the
TIP:
If you have a long list of contacts, enter the first few letters of a contact's name. Your HP iPAQ
searches the entire contact list to display the name. You can also tap the letter groups at the top
of the contact list to see the contacts in that letter group.
Redial a number
To redial the last number dialed, press the
Answer a call
To answer a call, press the
When you receive a call, you can either answer or ignore the call. When the phone stops ringing, the
caller might be sent to voice mail, depending on the settings provided by your service provider. To ignore
the call, tap Ignore on the incoming call dialog box or press the
Mute a call
You can mute the microphone during an active call. When you mute a call, the microphone is switched
off. This will prevent the person you are talking to from hearing what you say. However, this will not
prevent you from hearing the caller/recipient.
To mute the microphone during a call:
1.
Tap Mute on the Dialer screen.
2.
To disable the mute option, tap Unmute on the Dialer screen.
Put a call on hold
During a call, you can put the call on hold and dial another number or answer an incoming call. If you
have more than one call on the line, you can switch between calls.
●
To put a call on hold, tap Hold.
●
To switch between calls, tap Swap.
NOTE:
These buttons are available only on the Dialer screen.
Use call waiting
Use call waiting to be notified of incoming calls when you are on another call. You can view the number
of the person calling you, put your current caller on hold, and answer the incoming call. For more
information on enabling call waiting, see
30
Chapter 6 Use your HP iPAQ
(Answer/Send) key.
The Swap feature is available only if a call has already been placed on hold.
(Answer/Send) key or tap the contact twice to place a call.
(Answer/Send) key twice.
Call waiting on page
35.
(End/Power) key.