Use Key Guard; Know Your Device; Find Information About Your Hp Ipaq - HP iPAQ Data Messenger Product Manual

TIP: Change the text-input method from within any program by tapping the
and selecting an input method.
Label
ABC
123

Use Key Guard

The Key Guard program deactivates your HP iPAQ keys and touch screen to prevent accidental
activation of the HP iPAQ or any of its functions. When the display turns off or times-out as per the
display settings, this feature automatically locks your HP iPAQ. To set the backlight time-out, see
the brightness settings on page
Press and hold the Key Guard button, the first button on the left panel, for two seconds to lock your
HP iPAQ. When your HP iPAQ is locked, the Key Guard is on. Center Button: To Unlock message
is displayed on the screen. The display turns off after five seconds and your HP iPAQ goes into sleep
mode.
To unlock your HP iPAQ, press any key to activate your HP iPAQ from sleep mode, and then press the
Center Select button.
NOTE: To activate the Key Guard after you close the keyboard, press the Key Guard button or put
your device in the sleep mode.
NOTE: When you receive a call, the Key Guard remains active and allows you to answer or ignore a
call.
To dial an emergency number when the Key Guard is active, enter the emergency number using the
keyboard with less than 5 seconds delay. Press the
other key to clear the digit(s) entered.
When you dial an emergency number, it is verified against the emergency number list in your SIM card
and the HP database registry. If the entered number is not recognized as an emergency number, you
will not be able to dial the number.

Know your device

View your HP iPAQ to find the serial number and operating system information. Launch and use the
different programs installed on your HP iPAQ to increase your productivity and help you with your
day-to-day tasks.

Find information about your HP iPAQ

You can use your HP iPAQ to retrieve its own serial number and model number. You can also obtain
information about the hardware and the software installed on your HP iPAQ.
To view the serial number
1. Tap Start > Settings > System > HP Asset Viewer.
2. Tap the Identity tab to view the serial number.
3. Tap ok.
18 Chapter 5 Get started with your HP iPAQ
Description
Press a text-entry key on the keyboard to enter the character
you want.
Enter numbers and symbols using this mode.
23.
(Answer/Send) key to place the call. Press any
(Input selector) arrow
Adjust