Customize The Shortcut Key; Adjust The Speed For Scrolling Through Items In A List; Use The Proximity Sensor; Protect Your Hp Ipaq With A Password - HP iPAQ Data Messenger Product Manual

Hp ipaq data messenger: user guide
Table of Contents

Advertisement

To display the clock in the title bar of all programs:
1.
Tap Start > Settings > System > Clock & Alarms.
2.
On the More tab, tap to select the Display the clock on the title bar in all programs check box.
3.
Tap ok.

Customize the shortcut key

You can customize the third button on the left panel by assigning a program to it. Use the button to open
the program quickly.
NOTE:
The shortcut key is set to open Messaging by default. You can also customize the Camera
button.
To customize the shortcut key:
1.
Tap Start > Settings > Personal > Buttons > Program Buttons.
2.
Select a program from the Assign a program drop-down list.
3.
Tap ok.

Adjust the speed for scrolling through items in a list

To change the speed at which scrolling occurs:
1.
Tap Start > Settings > Personal > Buttons > Up/Down Control.
2.
Under Delay before first repeat, move the slider to reduce or increase the time that elapses before
scrolling begins.
3.
Under Repeat rate, move the slider to change the time it takes to scroll from one item to the next.
4.
Tap ok.

Use the proximity sensor

Your HP iPAQ is equipped with a proximity sensor. The proximity sensor prevents accidental screen
taps when you are on a call. When you are on a call and you hold your HP iPAQ near your ear, the
screen the proximity sensor detects this and locks the screen. It also turns the display off. The screen
automatically unlocks and turns on when you move the HP iPAQ away from your ear.

Protect your HP iPAQ with a password

Secure data on your HP iPAQ by setting a password. Each time you turn on your HP iPAQ, you will be
prompted to enter the password to unlock the device. You can also lock the screen to prevent any
accidental key press.
To enable password protection:
1.
Tap Start > Settings > Personal > Lock.
2.
Select the Prompt if device unused for check box and select a time duration.
3.
In the Password type list, select the kind of password you would want to use. Next, enter the
password, and then enter it again to confirm it.
26
Chapter 5 Get started with your HP iPAQ

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fb142aa

Table of Contents