Table of Contents
Advertisement
Synchronization
Question
I cannot synchronize my HP iPAQ with my computer. What
should I do?
My HP iPAQ was connected while I was installing WMDC. Why
does WMDC not launch even after installation?
Can I set up an active connection between my HP iPAQ and a
computer using Bluetooth for the first time?
Miscellaneous
Question
Why does the HP iPAQ seem sluggish sometimes?
116 Chapter 18 Frequently asked questions
Answer
To use the ActiveSync feature with Windows XP, upgrade your
computer to the latest version of ActiveSync. It is
recommended to use ActiveSync V4.5 or later.
To use the WMDC feature with Windows Vista, upgrade your
computer to the latest version of WMDC. It is recommended to
use WMDC V6.1 or a later.
Visit
http://www.microsoft.com/downloads
versions.
Check if advanced functions are enabled using the USB to PC
program. For more information, see
on page
24.
In some cases after an upgrade, you need to disconnect and
reconnect the HP iPAQ before WMDC can start.
No, the initial connection between your HP iPAQ and the
computer needs to be created only through a Micro-USB
synchronization cable using ActiveSync for Windows XP and
WMDC for Windows Vista. After this initial connection, you will
be able to set up Bluetooth for future connections.
Answer
You should have at least 1.5 MB to 2 MB of free memory space
on your HP iPAQ so that the device operates efficiently. To
check the free memory space, tap Start > Settings >
System > Memory.
Remember to delete or transfer e-mail messages and pictures
on your HP iPAQ to your computer to free available memory
space.
If you have many programs running on your HP iPAQ, quit
some programs to free memory. For more information, see
Access programs on page
19.
for the latest
Connect to a computer
Advertisement
Table of Contents
