Table of Contents
Advertisement
2.
Place the battery cover down and slide up until it locks into place.
Step 3: Charge the battery
CAUTION:
connectors are correctly aligned before connecting.
The battery provides power for your HP iPAQ to operate. Use the AC adapter to charge the battery
inside your HP iPAQ.
It takes approximately 2 to 4 hours to fully charge the battery for the first time. Charging might take more
time when the HP iPAQ is connected to a powered computer or with non-HP accessories.
To charge the battery:
1.
Connect the AC adapter (input: 100-240VAC, 47-63Hz, output: 5VDC, 1A) to an electrical outlet.
2.
Open the protective flap on the HP iPAQ.
To avoid damaging your HP iPAQ or the AC adapter, make sure that all the metal
Step 3: Charge the battery
9
Advertisement
Table of Contents
