HP zx2000 Technical Reference Manual page 70

System Configuration
To select:
Serial A/Serial 1
AGP Graphics Port
■
Each option is identified with an EFI Device path. Not all options will be available,
depending on the configuration of the system and the options purchased. Device paths may
differ slightly on different product models.
■
On both serial device examples, UART 9600 indicates the current baud rate of the serial
device. This can be changed with the EFI
emulation type. Several different terminal emulation protocols are supported (see list above).
■
Only one terminal emulation type (PcANSI, Vt100, etc.) can be selected for each serial
console, but multiple serial consoles can be selected at a time.
3–18
Choose:
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(HWP0003,0)/Pci(0|0)
baud
command. VenMsg Vt100+ is the current
technical reference guide