HP zx2000 Technical Reference Manual page 45

6. Disconnect the small power cable for the processor turbo fan.
Disconnect the Power Cable for the Processor Turbo Fan
1
Turbo fan heatsink
2
Power connector for processor turbo fan
7. Use the special processor tool provided with the replacement processor to unscrew the four
captive heatsink screws.
Unscrew the Four Turbo Fan Captive Heatsink Screws
8. Slide the sequencing plate to the open position: towards the top (tower) or right side
(rackmount) of the system. This opens up the hole in the edge of the turbo fan's heatsink for
insertion of the special processor tool into the processor locking mechanism.
Slide the Sequencing Plate This Way to Remove
technical reference guide
Installing or Replacing Parts and Accessories
1
2
2–29