HP zx2000 Technical Reference Manual page 59

monarch
palproc
salproc
time
ver
Device Commands
The device class commands provide device, driver and handle information.
baud
connect
devices
devtree
disconnect
dh
driver
drivers
drvcfg
drvdiag
guid
lanaddress
load
loadpcirom
map
openinfo
pci
reconnect
unload
Memory Commands
The memory class commands let you manage your memory.
default
dmpstore
dmem
memmap
mm
pdt
technical reference guide
View or set the monarch processor
Make a PAL procedure call
Make a SAL procedure call
Display the current time or set the time of the system; format is
Display the version information
Set serial port settings
Bind an EFI driver to a device and start the driver
Display the list of devices being managed by EFI drivers
Display the tree of devices that follow the EFI Driver Model
Disconnect one or more drivers from a device
Display the handles in the EFI environment
List and install ROM-based drivers
Display the list of drivers that follow the EFI Driver Model
Invoke the Driver Configuration Protocol
Invoke the Driver Diagnostics Protocol
Display all the GUIDs in the EFI environment
Display core I/O MAC address
Load and optionally connect EFI drivers
Load a PCI Option ROM
Display or define mappings
Display the protocols on a handle and the agents
Display PCI devices or PCI function configuration space
Reconnect one or more drivers from a device
Unload a protocol image
Reset all NVM values to system defaults
Display all NVRAM variables
Display the contents of memory
Display the memory map
Display or modify memory, memory-mapped IO and PCI settings
View or clear the Page Deallocation Table (PDT)
System Configuration
hh:mm:ss
3–7