Power Consumption And Cooling; Environmental Specifications - HP zx2000 Technical Reference Manual

power consumption and cooling

The power consumptions listed in the following table are valid for a standard configuration as
shipped (4 GB of memory, 450W power supply, two hard disk drives, and one graphics card).
All information in this section is based on primary power consumptions.
Additional Component
Processor
IDE hard disk drive with I/O access
IDE hard disk without I/O access (idle)
PCI card
AGP card

environmental specifications

Environmental Specifications (System Processing Unit with Hard Disk)
Operating temperature
Storage temperature
Over-temperature shutdown
Operating humidity
Storage humidity
Operating altitude
Storage altitude (long-term)
Operating temperature and humidity ranges may vary depending on the installed mass storage
devices. High humidity levels can cause improper disk operation. Low humidity levels can
aggravate static electricity problems and cause excessive wear of the disk surface.
technical reference guide
130W 443.6 Btu/h
23W 78.4 Btu/h
16W 54.5 Btu/h
10W to 25W 34.12 Btu/h to 85.30 Btu/h
50W (maximum) 170.6 Btu/h
+5° C to +35° C (+41° F to +95° F)
-40° C to +70 C (-40° F to +158° F)
+40° C (+104° F)
15% to 85% relative (non-condensing)
8% to 85% relative (non-condensing)
0-3000 m (0-10,000 ft.)
0-4600 m (0-15,000 ft.)
Product Information
1–5