HP zx2000 Technical Reference Manual page 104

Troubleshooting
Once the EMS hardware monitor is installed, you need to get it running. To do this, start the
Hardware Monitoring Request Manager and enable monitoring. This is done by executing the
following command at the shell prompt:
/etc/opt/resmon/lbin/monconfig
The opening screen looks similar to this:
========================================================
==========
==========
========================================================
EVENT MONITORING IS CURRENTLY ENABLED
========================================================
======
========================================================
Select:
(S)how current monitoring requests configured via monconfig
(C)heck detailed monitoring status
(L)ist descriptions of available monitor
(A)dd a monitoring request
(D)elete a monitoring request
(M)odify an existing monitoring request
(E)nable Monitoring
(K)ill (disable) monitoring
(H)elp
(Q)uit
Enter selection: [s]
4–20
Event Monitoring Service
Monitoring Request Manager
Monitoring Request Manager Main Menu
==========
==========
INDICATES
<== MONITORING
STATUS
========
<== MAIN MENU
SELECTION
OPTION
technical reference guide