Select Active Console Input Devices - HP zx2000 Technical Reference Manual

select active console input devices

Use this option to define the devices that will be used to provide input to the system console.
This option displays the console devices on your workstation. This may include a standard
keyboard or a serial port for receiving output from a terminal emulation package. Several
different terminal emulation protocols are supported.
■
When changing serial devices, changes must be made to Output, Input, and Error menus for
proper operation.
NOTE: If you are installing a modem in your system, make sure you disable the modem's serial
port from the Active Console Input and Active Console Output device lists.
For example:
Select the Console Input Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
* Acpi(HWP0002,0)/Pci(1|0)
Save Settings to NVRAM
Exit
* indicates a currently selected device.
■
Each option is identified with an EFI Device path. Not all options will be available,
depending on the configuration of the system and the options purchased. Device paths may
differ slightly on different product models.
■
On both serial device examples, UART 9600 indicates the current baud rate of the serial
device. This can be changed with the EFI
emulation type. Several different terminal emulation protocols are supported (see list above).
■
Only one terminal emulation type (PcAnsi, Vt100, etc.) can be selected for each serial
console, but multiple serial consoles can be selected at a time.
To select:
Serial A/Serial 1
USB Keyboard
technical reference guide
baud
Choose:
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(HWP0002,0)/Pci(1|0)
command. VenMsg Vt100+ is the current
System Configuration
3–19