Processor Assembly And Power Module - HP zx2000 Technical Reference Manual

Installing or Replacing Parts and Accessories

processor assembly and power module

Ä
CAUTION: You must follow these steps exactly and in the correct sequence to avoid serious
damage to the system.
removing a processor
1. Turn off the system, disconnect all power cables, and remove the system covers.
2. Raise the hard drive cage and remove the AGP retainer arm and airflow guide.
3. Disconnect the power module power cable.
1
Disconnect the Power Module Power Cable
1
Power module
2
Power module cable
4. Unscrew the power module mounting screws, then disconnect the module from its processor
by sliding it toward the back of the system chassis.
Unscrewing and Removing the Power Module
5. Remove the power module from the system.
2–28
2
technical reference guide