HP zx2000 Technical Reference Manual page 46

Installing or Replacing Parts and Accessories
9. Unlock the processor locking mechanism using the special processor tool shipped with your
replacement processor assembly. To do this, you need to rotate the mechanism 180 degrees
counter-clockwise.
NOTE: There is a hole that runs down through the edge of the turbo fan's heatsink, which allows
you access to the processor's locking mechanism using the hex-key end of the special processor
tool.
Unlock the Processor Locking mechanism
1
Insert special processor tool here
2
The special processor tool rotates this lock underneath the heat sink
3
Unlocked
4
Locked
10. Lift the turbo fan heatsink and processor out of the system.
Remove the Turbo Fan Heatsink and Processor Assembly
2–30
1
2
3
4
technical reference guide