Bmc Commands - HP zx2000 Technical Reference Manual

System Configuration
logging out of the BMC command line interface
When you are finished using the BMC CLI:
1. If you have a system password set, execute the following to log out of the BMC without
returning to the system console:
Q
The BMC login prompt displays:
login>
2. To log out of the BMC and return to the system console, press
and
Shift Q

BMC commands

overview
The Baseboard Management Controller supports the industry-standard Intelligent Platform
Management Interface (IPMI) specification. This specification describes the management
features that have been built into the system board. These features include: diagnostics (local and
remote), console support, configuration management, hardware management, and
troubleshooting.
There are two categories of BMC commands:
■
Simple commands
■
Intelligent Platform Management Interface (IPMI) commands
This section provides a brief overview of the available commands. For detailed information, see
the Intel web site:
Executing BMC Commands
To execute BMC commands at the command prompt:
■
Type the command and any required parameters after the cli> prompt.
■
Backspace
Use the
■
Enter
Press
3–24
at the same time).
http://www.intel.com/design/servers/ipmi
key to correct mistakes.
to execute the command.
(press , then press
Esc Q Esc
technical reference guide